The Conquip Super Roller Cantideck is the only loading platform in the UK that retracts fully within the building structure when not in use, sitting flush with the building edge between lifts. This 2200mm width variant suits narrower bay positions and is typically specified where multiple platforms stack above one another on a multi-floor logistics programme — the retraction capability allows simultaneous installation across floors with no downtime relocating decks, and in high winds the deck retracts to reduce dynamic loadings on the structure.
Key Features
- Retracts fully within the building edge when not in use — only loading platform in the UK with this capability
- Stackable above one another for multi-floor logistics with no relocation downtime
- Reduced dynamic loadings in high winds when retracted
- Shot-bolt locking at both extended and retracted positions
- Single-prop design reduces deck weight and reaction loadings
- 5000kg UDL working load limit (subject to slab verification)
Technical Specifications
| Product Code |
SR22 |
| Total Length |
9600mm |
| Outboard Length |
3800mm (when extended) |
| External Width |
2200mm |
| Internal Width |
1690mm |
| Weight |
2650kg |
| Working Load Limit |
5000kg UDL (Uniformly Distributed Load) |
| Lifting Points |
4 |
| Standards |
BS EN 13155 |
| Compliance |
LOLER 1998, PUWER 1998 |
Cantideck platforms load from the building edge without external scaffold support, and depend on correct counterweighting. For loads craned in from ground level see goods cages and lifting beams.
5000kg UDL | Retractable design | LOLER 1998 compliant | UK Manufactured
Roll-out / roll-in installation. Stackable in multi-floor configurations. Site Surveyor must verify slab strength and de-rate as required.
Suitable Applications
The 2200mm Super Roller Cantideck is typical for high-rise residential and commercial projects running multi-floor stacked-deck logistics. Common where space constraints, adjacent lifting equipment, or wind exposure make retraction valuable; also suited to underground works in tunnels and shafts where temporary clearance of the deck zone is needed between lift cycles.