Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Modulift MOD 110 modular spreader beam
1 / 2

Modulift MOD 110 Spreader Beam Hire

Part no. LGH-HIRE-MODULIFT-MOD110-2-0M
Weekly hire
From £268.38/wkFrom £223.65/wkInc VATEx VAT
From £223.65/wk ex VATFrom £268.38/wk inc VAT ·
Span: 2.0m
Hire cannot start on days highlighted with a dotted border.
Total: £ ()
Excluding any selected add-ons
Hire return within days

About this item

  • Weekly hire of a complete Modulift MOD 110 spreader beam
  • Rated 110t at 14m span, spans 2.0m to 18.0m
  • Supplied as a full set for your span, certified, delivered per mile

Product description

Hire a Modulift MOD 110 modular spreader beam, rated 110 t at 14 m span and built to spans from 2 m to 18 m. It arrives as a certified kit of end units, drop links, struts, nuts and bolts for your chosen span.

Spreader beams keep slings vertical over the load, so the load is not crushed and lifting points take a straight pull. It suits heavy lifts over long spans, up to 110 t at 14 m. Parts are also sold in our MOD 110 range.

Key Features
  • Rated 110 t at 14 m span
  • Spans 2.0 m to 18.0 m, chosen at order
  • End units, drop links, struts and bolts supplied
  • DNV type approved
  • Weekly hire with current thorough examination report

Specifications

SeriesModulift MOD 110
Series rating110 t at 14 m span
Spans available2.0 m to 18.0 m in 0.5 m steps
Maximum span18 m at reduced capacity
Bolts (Modulift)M20 x 65 Grade 8.8 HT
Component weights (Modulift)End unit 178 kg; drop link 45 kg; struts 4.0 m 367 kg, 2.0 m 212 kg, 1.0 m 134 kg, 0.5 m 96 kg
Shackles specified by Modulift (not included)85 t (62 kg) and 55 t (40 kg)
ApprovalDNV type approved
Supplied withCurrent report of thorough examination; Modulift instructions
What's Included
  • Modulift MOD 110 end units, drop links and struts for your span
  • Nuts and bolts
  • Current report of thorough examination
  • Modulift user instructions

You may also need: matched Green Pin shackles and top slings, available to hire. Shackles are not included.

Documents (2)

View on this page or download.

PDFUser Instructions
PDF document
PDFInspection Guide
PDF document

Using and looking after it

Always read the manufacturer’s instructions before use. See the documents

Typical Applications
  • Two-point lifts of long or flexible loads
  • Lifts where slings must stay clear of the load
  • Low-headroom lifts
  • Plant, modules, precast and steelwork

Buying guide

Design & Construction

A Modulift beam is a strut (tube) with an end unit bolted to each end. Top slings run from the crane hook to the end units; the load hangs from the drop links below. Changing struts changes the span.

The sling-to-vertical (STV) angle is the angle between each top sling and vertical. The flatter the slings, the more compression goes into the beam, so the rating falls as the angle opens.

Longer top slings reduce the angle and keep more capacity.

Choosing the Right Size

Tell us the load weight, the span between lifting points and the headroom available, and we will confirm the span, configuration and sling lengths. For up to 170 t, see MOD 110H hire.

Questions and answers

Q: Is it supplied assembled?

A: It comes as a complete set of components for your span, with nuts and bolts, to assemble following the Modulift instructions.

Q: Are shackles included?

A: No. Matched Green Pin shackles can be hired; ask for the right sizes for your span.

Q: How is hire charged?

A: By the week; seven days costs one week and the minimum hire is one week.

Have a question about this product?Ask a question

More in Modulift

View all →