The Modulift MOD 70H uses the MOD 70 struts with heavy-duty end units and drop links, raising the rating to 100 t at 8.5 m span.
Hire it built to any span from 1 m to 14 m. It arrives as a certified kit of end units, drop links, struts, nuts and bolts for your chosen span.
Spreader beams keep slings vertical over the load, so the load is not crushed and lifting points take a straight pull. Its end units and drop links are sold in our MOD 70H range.
You may also need: matched Green Pin shackles and top slings, available to hire. Shackles are not included.
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
A Modulift beam is a strut (tube) with an end unit bolted to each end. Top slings run from the crane hook to the end units; the load hangs from the drop links below. Changing struts changes the span.
The sling-to-vertical (STV) angle is the angle between each top sling and vertical. The flatter the slings, the more compression goes into the beam, so the rating falls as the angle opens.
Longer top slings reduce the angle and keep more capacity.
Tell us the load weight, the span between lifting points and the headroom available, and we will confirm the span, configuration and sling lengths. For loads up to 70 t, the standard MOD 70 is also on hire.
A: It comes as a complete set of components for your span, with nuts and bolts, to assemble following the Modulift instructions.
A: No. Matched Green Pin shackles can be hired; ask for the right sizes for your span.
A: By the week; seven days costs one week and the minimum hire is one week.
A: Per mile from our Sheffield depot.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account

Modulift is a British designer and manufacturer of modular spreader beams, lifting beams and spreader frames. Sue Spencer founded the company in 2002, and it is based in Poole, Dorset. Its range covers capacities up to 600 tonnes.
See all Modulift products →