Ready for dispatch
This is a genuine Modulift MOD 110H end unit, part 0110H/EU085, an individual component for building a MOD 110H modular spreader beam.
A complete beam uses a pair of end units, a pair of MOD 110H drop links and the struts that set the span.
End units are the ends of the beam.
They take the struts on one side and the drop link on the other, carrying the sling load into the beam and setting its geometry. The MOD 110H series is rated 170t at 11.5 m span, with spans up to 18 m at reduced capacity.
The working load limit depends on the assembled span and sling angle, so check the Load v Span table for every configuration.
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
A: Two, one at each end.
A: No. Use one series throughout.
A: Yes. Give us the span, the load and the sling-to-vertical angle and we will specify the struts, end units and drop links.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account

Modulift is a British designer and manufacturer of modular spreader beams, lifting beams and spreader frames. Sue Spencer founded the company in 2002, and it is based in Poole, Dorset. Its range covers capacities up to 600 tonnes.
See all Modulift products →