Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Steerman SX20 Complete Load Moving System, 20t Capacity
1 / 2

Steerman SX20 Complete Load Moving System, 20t Capacity

Part no. SX20
£2,647.88£2,206.57Inc VATEx VAT
£2,206.57 ex VAT£2,647.88 inc VAT ·

About this item

  • 20t complete three-point steerable load moving system
  • 32 twin polyamide rollers (82mm), 102mm height, 76kg
  • Universal joint suspension; turntable on axial ball bearing
  • Modular design combines for higher capacities

Product description

The Steerman SX20 is a complete 20 t steerable load moving system, doubling the SX10's roller count to 32 while keeping the same 102 mm height.

Its rear machine skates adjust from 480 to 1,500 mm apart, suiting mid-size machine tools, presses and plant.

The front skate steers on a turntable over an axial ball bearing, and the rollers run on sealed, lifetime-lubricated bearings. Start-up effort is about 1.5 to 2% of the load on a good floor.

Key Features
  • 20 t capacity: 10 t front, 5 t per rear skate
  • 32 twin polyamide rollers, 82 x 48 mm
  • Steerable front on axial ball-bearing turntable
  • Universal joint suspension keeps rollers in contact
  • 102 mm overall height; removable towing bar

Specifications

ModelSX20
System capacity20 t
Front unit capacity10 t
Capacity per rear skate5 t
Rollers32, 82 x 48 mm, polyamide
Turntable diameter180 mm
Overall height102 mm
Rear width adjustment480 to 1,500 mm
System weight76 kg
Start-up effort1.5 to 2% of load (subject to gradient, wheels and floor)
ChassisDuctile (spheroidal graphite) cast iron
BearingsTwo encapsulated lifetime-lubricated ball bearings per roller

The datasheet and operating manual are available on request.

What's Included
  • Steerman SX20F steerable front section with removable towing bar
  • 2 x SX20R rear skates with tie rod

You may also need: SX20F front section as a spare or for bespoke set-ups; Steerman SCS caterpillar skates for occasional, non-steered moves.

Documents (1)

View on this page or download.

PDFDatasheet
PDF document

Using and looking after it

Always read the manufacturer’s instructions before use. See the documents

Typical Applications
  • Moving machine tools and production equipment
  • Factory relocations and line changes
  • Positioning plant in buildings with level floors
  • Placing equipment through doorways and tight turns

Buying guide

Design & Construction

The system loads on three points: the steerable front skate under one end of the load and two rear skates, joined by a tie rod, under the other. Three-point support keeps all rollers in contact on a slightly uneven floor.

For very bulky loads with an awkward centre of gravity, a four-point layout can be used.

Each roller group uses twin rollers rather than one wide roller, which keeps rolling resistance low even on tight turns. The chassis is ductile (spheroidal graphite) cast iron, and the rollers are elastic, abrasion-resistant polyamide that will not mark normal in-plant floors.

Choosing the Right Size
System Capacity Rollers Roller size Height Rear width Weight
SX10 10 t 16 82 x 48 mm 102 mm 252 to 1,200 mm 54 kg
SX20 (this one) 20 t 32 82 x 48 mm 102 mm 480 to 1,500 mm 76 kg
SX30 30 t 48 82 x 48 mm 110 mm 720 to 1,500 mm 136 kg
S60 60 t 48 115 x 54 mm 170 mm 800 to 2,000 mm 302 kg

Choose a system rated above the load, with the front skate rating (10 t here) above the share of load at that end. Components combine across the range for larger set-ups.

Questions and answers

Q: What floors can it run on?

A: Hard, level in-plant floors. Not over rough surfaces, floor joints, door tracks, manhole covers, tarmac or asphalt.

Q: How much force does it take to move?

A: About 1.5 to 2% of the load to start it moving, on a good floor. For a 20 t load that is roughly 300-400 kg of pull.

Q: Can I buy the sections separately?

A: Yes. The SX20F front and SX20R rear sections are sold individually.

Have a question about this product?Ask a question

More in Steerman SX/S Series

View all →