Ready for dispatch
The Steerman SX10 is a complete 10 t load moving system: a steerable front skate and two adjustable rear skates on a tie rod, together just 54 kg and 102 mm high.
It is the lightest system in the range, easy to carry between jobs and slide under machinery with little clearance.
The front skate steers on a turntable over an axial ball bearing, and the rollers run on sealed, lifetime-lubricated bearings. Start-up effort is about 1.5 to 2% of the load on a good floor.
The datasheet and operating manual are available on request.
You may also need: SX10F front section as a spare or for bespoke set-ups; Steerman SCS caterpillar skates for occasional, non-steered moves.
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
The system loads on three points: the steerable front skate under one end of the load and two rear skates, joined by a tie rod, under the other. Three-point support keeps all rollers in contact on a slightly uneven floor.
For very bulky loads with an awkward centre of gravity, a four-point layout can be used.
Each roller group uses twin rollers rather than one wide roller, which keeps rolling resistance low even on tight turns. The chassis is ductile (spheroidal graphite) cast iron, and the rollers are elastic, abrasion-resistant polyamide that will not mark normal in-plant floors.
| System | Capacity | Rollers | Roller size | Height | Rear width | Weight |
|---|---|---|---|---|---|---|
| SX10 (this one) | 10 t | 16 | 82 x 48 mm | 102 mm | 252 to 1,200 mm | 54 kg |
| SX20 | 20 t | 32 | 82 x 48 mm | 102 mm | 480 to 1,500 mm | 76 kg |
| SX30 | 30 t | 48 | 82 x 48 mm | 110 mm | 720 to 1,500 mm | 136 kg |
| S60 | 60 t | 48 | 115 x 54 mm | 170 mm | 800 to 2,000 mm | 302 kg |
Choose a system rated above the load, with the front skate rating (5 t here) above the share of load at that end. Components combine across the range for larger set-ups.
A: Hard, level in-plant floors. Not over rough surfaces, floor joints, door tracks, manhole covers, tarmac or asphalt.
A: About 1.5 to 2% of the load to start it moving, on a good floor. For a 10 t load that is roughly 150-200 kg of pull.
A: Yes. The SX10F front and SX10R rear sections are sold individually.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
Steerman makes load moving skate systems for shifting heavy machinery and plant. Each system pairs a steerable front skate with a pair of adjustable rear trolleys. The business was founded in the UK in 1992 and is now a Columbus McKinnon (CMCO) brand alongside Yale.
See all Steerman products →