Steerman S60R Rear Section, 30t Capacity

Model S60R | Adjustable Rear Pair | 30t Capacity | Twin Polyamide Rollers | Tie Rod Connected

The Steerman S60R is the 30t rear section from the Steerman SX/S range, supplied as a matched pair of skates joined by an adjustable tie rod. The tie rod keeps both rear skates parallel and at the correct spacing for the load. Runs on twin rollers of abrasion-resistant elastic polyamide with universal joint suspension. Pairs with the matching S60F front section to make up the S60 complete system, or sold separately for bespoke configurations.

Technical Specifications

Key Features

• Pair of skates with adjustable tie rod — two skates joined by a tie rod for stable load support; tie rod adjusts to suit load width
• Twin polyamide rollers — abrasion-resistant elastic material, high chemical resistance, protected against breakage, won't damage normal floor coverings
• Universal joint roller suspension — maintains positive contact on slightly uneven floors
• 30t rear capacity — takes the rear-distributed share of the S60 system load
• Spare parts and full system support — rollers, axles, frames and bearings sold individually for maintenance

Suitable Applications

The S60R is the rear half of the S60 Steerman SX/S system. The pair of skates with adjustable tie rod follows the steerable front's path with stable two-point ground contact. Suits professional industrial moves where heavy loads are moved through workshops, machine shops, plant rooms and on-site installation work.

How to Use the Rear Section

1. Confirm the 30t rear capacity is suitable for the rear-distributed share of the intended load.
2. Adjust the tie rod to match the load width — both rear skates should run parallel and centred on the load.
3. Position the rear pair under the rear of the load using rated jacking equipment.
4. Position the matching S60F front section under the front of the load.
5. Lower the load onto both sections and confirm stable contact.
6. The rear pair will follow the front's steered path during the move — keep personnel clear on both sides.

Warning: Do not exceed the 30t rated rear capacity. The matched front must be present and steered by a qualified operator. Keep the rear pair parallel to the line of direction throughout the move.

Safety Information

• Always pair with the matching S60F front section at the correct capacity.
• Confirm the tie rod adjustment is correct for the load width and locked in place.
• Inspect the frame, rollers and tie rod attachment before each use.
• Do not allow personnel to stand behind the rear pair during transport.
• Use spotters where the load obscures the rear pair's rolling path.

Inspection and Maintenance

Maintenance-free in normal use. Inspect weekly with attention to roller polyamide condition, roller bearings, axles, tie rod attachment and frame weld points. Replace worn rollers using genuine Steerman spare parts.

Frequently Asked Questions

Documents

• Steerman SX/S Datasheet (PDF)
• Operating Manual (PDF)