Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Green Pin® Catch Bow Shackle with Safety Nut and Bolt Pin – GPCSAB
1 / 5

Green Pin Catch Bow Shackle with Safety Nut and Bolt Pin GPCSAB

Part no. GPCSAB2
£15.13£12.61Inc VATEx VAT
£12.61 ex VAT£15.13 inc VAT ·
Size: 2T

About this item

  • Catch bow shackle with safety nut and bolt pin, WLL 2t to 9.5t
  • Grade 6 high tensile steel, BS EN 13889 and ASME B30.26, MBL 6 x WLL
  • Hot dipped galvanised, rated -40°C to +200°C

Product description

The Green Pin Catch shackle is a bow shackle with safety nut and bolt pin where every part (body, bolt, nut and split pin) has a tether point, to stop dropped objects at height.

Co-developed with DROPS. 2 t to 9.5 t, hot dipped galvanised.

For general rigging without tether points, see the standard GPSAB bow shackle.

Key Features
  • Tether point on body, bolt, nut and pin
  • BS EN 13889, ASME B30.26
  • 6:1 minimum breaking load, -40°C to +200°C

Specifications

Choose a size above to see its specifications.

Compare all 6 sizes
Code WLL (t) A B C D E F G H L Weight (kg)
GPCSAB2 2 13.5 16 34 13 22 51 32 89 15 0.47
GPCSAB3.25 3.25 16 19 40 16 27 64 43 110 15 0.81
GPCSAB4.75 4.75 19 22 46 19 31 76 51 129 15 1.32
GPCSAB6.5 6.5 22 25 52 22 36 83 58 144 15 1.92
GPCSAB8.5 8.5 25 28 59 25 43 95 68 164 15 2.77
GPCSAB9.5 9.5 28 32 66 28 47 108 75 185 15 3.91

A bow diameter, B pin diameter, C eye diameter, D eye width, E inside width, F inside length, G bow width, H length, L lanyard hole diameter (mm). Grade 6 high tensile steel body and pin, quenched and tempered, hot dipped galvanised. Supplied without wires or lanyards; choose your own tethering. For other connecting hardware, see our chain and fittings.

Before you use it
  • Check it. Markings must be legible, and the body and pin must be the same brand, type and size. Look for damaged threads, distortion, wear, nicks, gouges, cracks and corrosion. Never use a shackle with a bent pin, tight threads or misaligned pin holes.
  • Fit the pin properly. Screw a collar pin in hand-tight, then tighten it with a wrench so the collar sits fully on the eye. Never use a safety bolt shackle without its cotter pin.
  • Use only the matching pin. Never replace it with any other pin or bolt.
  • Never modify it. No welding, heating, machining or bending, and no washers welded inside the eyes to narrow the jaw.
  • Keep it away from acids and other harmful chemicals.
  • Hazardous work. The WLL assumes normal conditions. For offshore work, lifting people, or molten or corrosive loads, a competent person must reduce it.
  • Inspect it at least every 6 months, more often in severe conditions.

Documents (2)

View on this page or download.

PDFSpecification Sheet
PDF document
PDFUser Instructions
PDF document

Buying guide

Choosing the right Green Pin shackle

Pin type. A screw collar pin is quick to fit and remove, for lifts where the shackle is not left in place. Choose a safety bolt shackle (bolt, nut and cotter pin) where the shackle stays in place for a long time, where the load can move over the pin and turn it, or where you need maximum pin security.

Two slings on one hook. Use a bow shackle, with the slings on the bow and the pin in the hook. Put no more than two sling legs on the bow, with no more than 120° between them. Loaded evenly like this, the full WLL can be used.

Side loading. Green Pin shackles are not designed for side loads. If one cannot be avoided, the WLL must be reduced using Van Beest's side-load chart.

The ROV shackles P-5363 and P-5367 are for in-line use only, and sling shackles have their own reduction curves.

Heat. Above 200 °C the WLL must be reduced:

Temperature Usable WLL
Up to 200 °C 100%
200 to 300 °C 90%
300 to 400 °C 75%
Above 400 °C Not allowed

More in Shackles

View all →