Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Green Pin® Square Sunken Hole Bow Shackle – GPSQSUB
1 / 8

Green Pin Square Sunken Hole Bow Shackle GPSQSUB

Part no. GPSQSUB2
£13.91£11.59Inc VATEx VAT
£11.59 ex VAT£13.91 inc VAT ·
Size: 2T

About this item

  • Square sunken hole bow shackle, WLL 2t to 17t
  • Grade 6 steel, ISO 2415, BS EN 13889 and ASME B30.26, MBL 6 x WLL
  • Hot dipped galvanised, pin key (E-4170) supplied separately

Product description

The Green Pin GPSQSUB is a Grade 6 bow shackle whose pin head sits in a square sunken hole in the shackle eye, so nothing stands proud for a sling or rope to catch on and turn. The pin is undone with a separate key (Green Pin E-4170).

Eight sizes cover 2 t to 17 t WLL. Hot dipped galvanised, to EN 13889, with a minimum breaking load of six times WLL. For single in-line loads, the sunken hole dee shackle is the alternative.

Key Features
  • Pin head recessed in a square sunken hole
  • Nothing protrudes to snag or turn the pin
  • Key E-4170 for the pin, supplied separately
  • Bow body for multi-leg slings and angled loads
  • Eight sizes, 2 t to 17 t WLL

Specifications

Choose a size above to see its specifications.

Compare all 8 sizes
Code WLL (t) A B C D E H Weight (kg)
GPSQSUB2 2 13.5 16 34 13 22 89 0.31
GPSQSUB3.25 3.25 16 19 40 16 27 110 0.56
GPSQSUB4.75 4.75 19 22 46 19 31 129 0.96
GPSQSUB6.5 6.5 22 25 52 22 36 144 1.38
GPSQSUB8.5 8.5 25 28 59 25 43 164 2.18
GPSQSUB9.5 9.5 28 32 67 28 47 185 2.84
GPSQSUB12 12 32 35 73 32 51 201 3.91
GPSQSUB17 17 38 42 88 38 60 249 6.81

Dimensions in mm; letters refer to Green Pin's dimension drawing. For other connecting hardware, see our chain and fittings.

Material Grade 6 high tensile steel body and pin, quenched and tempered
Finish Hot dipped galvanised
Standards EN 13889; meets the performance requirements of US Fed. Spec. RR-C-271 Grade A. For ISO 2415 or ASME B30.26
Safety factor Minimum breaking load 6 x WLL
Pin key E-4170, supplied separately
Before you use it
  • Check it. Markings must be legible, and the body and pin must be the same brand, type and size. Look for damaged threads, distortion, wear, nicks, gouges, cracks and corrosion. Never use a shackle with a bent pin, tight threads or misaligned pin holes.
  • Fit the pin properly. Screw a collar pin in hand-tight, then tighten it with a wrench so the collar sits fully on the eye. Never use a safety bolt shackle without its cotter pin.
  • Use only the matching pin. Never replace it with any other pin or bolt.
  • Never modify it. No welding, heating, machining or bending, and no washers welded inside the eyes to narrow the jaw.
  • Keep it away from acids and other harmful chemicals.
  • Hazardous work. The WLL assumes normal conditions. For offshore work, lifting people, or molten or corrosive loads, a competent person must reduce it.
  • Inspect it at least every 6 months, more often in severe conditions.

Documents (1)

View on this page or download.

PDFDatasheet
PDF document

Buying guide

Choosing the right Green Pin shackle

Pin type. A screw collar pin is quick to fit and remove, for lifts where the shackle is not left in place. Choose a safety bolt shackle (bolt, nut and cotter pin) where the shackle stays in place for a long time, where the load can move over the pin and turn it, or where you need maximum pin security.

Two slings on one hook. Use a bow shackle, with the slings on the bow and the pin in the hook. Put no more than two sling legs on the bow, with no more than 120° between them. Loaded evenly like this, the full WLL can be used.

Side loading. Green Pin shackles are not designed for side loads. If one cannot be avoided, the WLL must be reduced using Van Beest's side-load chart.

The ROV shackles P-5363 and P-5367 are for in-line use only, and sling shackles have their own reduction curves.

Heat. Above 200 °C the WLL must be reduced:

Temperature Usable WLL
Up to 200 °C 100%
200 to 300 °C 90%
300 to 400 °C 75%
Above 400 °C Not allowed

Questions and answers

Q: Why a sunken hole pin?

A: The recessed head can't be caught by a passing sling or rope, so it is less likely to be turned loose.

Q: Is the key included?

A: No. The E-4170 key for unscrewing the pin is supplied separately.

Q: Bow or dee?

A: A bow has a rounded body that takes several sling eyes and copes better with angled loads. A dee is narrower and is for a single, in-line load; don't put a multi-leg sling in a dee.

Have a question about this product?Ask a question

More in Shackles

View all →