Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Green Pin® Square Sunken Hole Dee Shackle – GPSQSUD
1 / 3

Green Pin Square Sunken Hole Dee Shackle GPSQSUD

Part no. GPSQSUD2
£14.06£11.72Inc VATEx VAT
£11.72 ex VAT£14.06 inc VAT ·
Size: 2T

About this item

  • Square sunken hole dee shackle, WLL 2t to 17t
  • Grade 6 high tensile steel, BS EN 13889 and ASME B30.26, MBL 6 x WLL
  • Hot dipped galvanised, pin key (E-4170) supplied separately

Product description

The Green Pin GPSQSUD is a Grade 6 dee shackle whose pin head sits in a square sunken hole in the shackle eye, so nothing stands proud for a sling or rope to catch on and turn. The pin is undone with a separate key (Green Pin E-4170).

Eight sizes cover 2 t to 17 t WLL. Hot dipped galvanised, to EN 13889, with a minimum breaking load of six times WLL. For multi-leg slings, use the sunken hole bow shackle.

Key Features
  • Pin head recessed in a square sunken hole
  • Nothing protrudes to snag or turn the pin
  • Key E-4170 for the pin, supplied separately
  • Dee body for single in-line loads
  • Eight sizes, 2 t to 17 t WLL

Specifications

Choose a size above to see its specifications.

Compare all 8 sizes
Code WLL (t) A B C D E H Weight (kg)
GPSQSUD2 2 13.5 16 34 13 22 51 0.29
GPSQSUD3.25 3.25 16 19 40 16 27 63 0.53
GPSQSUD4.75 4.75 19 22 46 19 31 74 0.86
GPSQSUD6.5 6.5 22 25 52 22 36 85 1.26
GPSQSUD8.5 8.5 25 28 59 25 43 99 2.14
GPSQSUD9.5 9.5 28 32 67 28 47 110 2.58
GPSQSUD12 12 32 35 73 32 51 122 3.49
GPSQSUD17 17 38 42 88 38 60 145 6.24

Dimensions in mm; letters refer to Green Pin's dee shackle drawing, on which H is the pin (bolt) length. See our chain and fittings for the rest of the rig.

Material Grade 6 high tensile steel body and pin, quenched and tempered
Finish Hot dipped galvanised
Standards EN 13889; meets the performance requirements of US Fed. Spec. RR-C-271 Grade A. For ASME B30.26
Safety factor Minimum breaking load 6 x WLL
Pin key E-4170, supplied separately
Before you use it
  • Check it. Markings must be legible, and the body and pin must be the same brand, type and size. Look for damaged threads, distortion, wear, nicks, gouges, cracks and corrosion. Never use a shackle with a bent pin, tight threads or misaligned pin holes.
  • Fit the pin properly. Screw a collar pin in hand-tight, then tighten it with a wrench so the collar sits fully on the eye. Never use a safety bolt shackle without its cotter pin.
  • Use only the matching pin. Never replace it with any other pin or bolt.
  • Never modify it. No welding, heating, machining or bending, and no washers welded inside the eyes to narrow the jaw.
  • Keep it away from acids and other harmful chemicals.
  • Hazardous work. The WLL assumes normal conditions. For offshore work, lifting people, or molten or corrosive loads, a competent person must reduce it.
  • Inspect it at least every 6 months, more often in severe conditions.

Documents (1)

View on this page or download.

PDFDatasheet
PDF document

Buying guide

Choosing the right Green Pin shackle

Pin type. A screw collar pin is quick to fit and remove, for lifts where the shackle is not left in place. Choose a safety bolt shackle (bolt, nut and cotter pin) where the shackle stays in place for a long time, where the load can move over the pin and turn it, or where you need maximum pin security.

Two slings on one hook. Use a bow shackle, with the slings on the bow and the pin in the hook. Put no more than two sling legs on the bow, with no more than 120° between them. Loaded evenly like this, the full WLL can be used.

Side loading. Green Pin shackles are not designed for side loads. If one cannot be avoided, the WLL must be reduced using Van Beest's side-load chart.

The ROV shackles P-5363 and P-5367 are for in-line use only, and sling shackles have their own reduction curves.

Heat. Above 200 °C the WLL must be reduced:

Temperature Usable WLL
Up to 200 °C 100%
200 to 300 °C 90%
300 to 400 °C 75%
Above 400 °C Not allowed

Questions and answers

Q: Why a sunken hole pin?

A: The recessed head can't be caught by a passing sling or rope, so it is less likely to be turned loose.

Q: Is the key included?

A: No. The E-4170 key for unscrewing the pin is supplied separately.

Q: How often does it need examining?

A: Under LOLER 1998, lifting accessories need a thorough examination by a competent person at least every 6 months, and must be withdrawn after any overload.

Have a question about this product?Ask a question

More in Shackles

View all →