The Invicta High-Lift Access Platform (Model IAP-3HL) is the perfect solution when additional lift height is required — fork pockets are positioned at floor level with the platform a further 1000mm higher, giving significantly greater elevation than standard access platforms. Access is via a fixed ladder with hand rails and an automatic locking/unlocking gate assembly for safe entry and exit. Manufactured in Leeds by Invicta Forks & Attachments.
Key Features
- 1000mm additional platform height above fork pockets — significantly more elevation than standard access platforms
- Automatic locking and unlocking gate — safe entry and exit without manual latching
- Fixed ladder with hand rails — secure access to the elevated platform
- Safety harness attachment rings — anchor points for personal fall protection
- Self-draining non-slip floor — safe footing in wet conditions
- Zinc plated heel pins and locking chain — secure attachment to the forklift truck
- Painted bright orange for safety — high-visibility finish for on-site safety compliance
Technical Specifications
| Model |
Access Type |
Persons |
Platform L×W×H (mm) |
Capacity (kg) |
Weight (kg) |
| IAP-3HL |
Side Gate |
2 |
950 × 950 × 2920 |
250 |
234 |
Maximum fork section: 150 × 50mm at 690mm centres.
UK Manufactured | LOLER Compliant
This product is designed and manufactured in the UK by Invicta Forks & Attachments, the UK's largest mechanical forklift attachment manufacturer, based in Leeds. Where applicable, this product is supplied with a test certificate and EC Declaration of Conformity. LOLER 1998 thorough examinations are required every 6 months by a competent person after initial certification.
A platform lifts people, which carries requirements no other attachment does — a MEWP or tower is the preferred option wherever practicable. For crane-suspended work see access cages and man baskets.
Inspection and Maintenance
Inspect regularly with particular attention to all weld points, lifting eyes, pivot points and any signs of deformation or corrosion. Certified for six months from manufacture — thorough examination under LOLER 1998 required every 6 months.
