Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Modulift MOD 110 modular spreader beam
1 / 3

Modulift MOD 400/600 Spreader Beam Hire

Part no. LGH-HIRE-MODULIFT-MOD400600-2-0M
Weekly hire
From £1,886.40/wkFrom £1,572.00/wkInc VATEx VAT
From £1,572.00/wk ex VATFrom £1,886.40/wk inc VAT ·
Span: 2.0m
Hire cannot start on days highlighted with a dotted border.
Total: £ ()
Excluding any selected add-ons
Hire return within days

About this item

  • Weekly hire of a complete Modulift MOD 400/600 spreader beam
  • Rated 600t at 14m span (30° STV), spans 2.0m to 24.0m
  • Supplied as a full component set for your span, certified, delivered per mile

Product description

The Modulift MOD 400/600 is rated 600 t at 14 m span, the highest-rated Modulift beam in our hire fleet, built to spans from 2 m to 24 m. It arrives as a certified kit of end units, drop links, struts, nuts and bolts for your chosen span.

Spreader beams keep slings vertical over the load, so the load is not crushed and lifting points take a straight pull. It uses the MOD 400 struts with 300 t end units. Smaller beams are in our Modulift range.

Key Features
  • Rated 600 t at 14 m span (30° STV)
  • Spans 2.0 m to 24.0 m, chosen at order
  • End units, drop links, struts and bolts supplied
  • DNV type approved
  • Weekly hire with current thorough examination report

Specifications

SeriesModulift MOD 400/600
Series rating600 t at 14 m span (30° STV)
Spans available2.0 m to 24.0 m in 0.5 m steps
Maximum span24 m at reduced capacity
WLL at other spans and anglesSee Load v Span table below
Maximum sling-to-vertical angle45°
Lower slingsNot more than 6° from vertical
Maximum struts per assembly5
End unit and drop link rating300 t WLL each (600 t combined)
BoltsM24 x 90 Grade 8.8 HT, 10 per connection, 250 Nm (36 mm spanner)
Component weightsEnd unit 610 kg; drop link 150 kg; struts 6.0 m 1365 kg, 3.0 m 785 kg, 2.0 m 590 kg, 1.0 m 395 kg, 0.5 m 286 kg
Shackles specified by Modulift (not included)400 t wide body top (580 kg) and 300 t wide body lower (360 kg)
Temperature rating-20 °C to 60 °C
ApprovalDNV type approved
Supplied withCurrent report of thorough examination; Modulift instructions

Load v Span (Modulift)

Span (m) WLL 45° STV (t) Min. top sling 45° (m) WLL 30° STV (t) Min. top sling 30° (m) WLL 20° STV (t) Min. top sling 20° (m) Configuration
2 559 0.8 600 1.4 600 2.3 EU EU
3 559 1.5 600 2.4 600 3.8 EU 1 EU
4 559 2.2 600 3.4 600 5.2 EU 2 EU
5 559 2.9 600 4.4 600 6.7 EU 3 EU
6 559 3.6 600 5.4 600 8.2 EU 3 1 EU
7 559 4.3 600 6.4 600 9.6 EU 3 2 EU
8 559 5.1 600 7.4 600 11.1 EU 6 EU
9 556 5.8 600 8.4 600 12.6 EU 6 1 EU
10 515 6.5 600 9.4 600 14.0 EU 6 2 EU
11 473 7.2 600 10.4 600 15.5 EU 6 3 EU
12 432 7.9 600 11.4 600 16.9 EU 3 6 1 EU
13 391 8.6 600 12.4 600 18.4 EU 3 6 2 EU
14 349 9.3 600 13.4 600 19.9 EU 6 6 EU
15 316 10.0 551 14.4 600 21.3 EU 6 6 1 EU
16 283 10.7 495 15.4 600 22.8 EU 6 6 2 EU
17 253 11.4 443 16.4 600 24.2 EU 6 6 3 EU
18 227 12.1 397 17.4 600 25.7 EU 1 6 6 3 EU
19 202 12.8 355 18.4 566 27.2 EU 2 6 6 3 EU
20 180 13.5 317 19.4 506 28.6 EU 6 6 6 EU
21 160 14.2 281 20.4 450 30.1 EU 6 6 6 1 EU
22 142 15.0 251 21.4 401 31.6 EU 6 6 6 2 EU
23 126 15.7 223 22.4 358 33.0 EU 6 6 6 3 EU
24 111 16.4 198 23.4 319 34.5 EU 6 6 6 3 1 EU

EU = end unit; other figures are strut lengths in metres, longest in the centre.

What's Included
  • Modulift MOD 400/600 end units, drop links and struts for your span
  • Nuts and bolts
  • Current report of thorough examination
  • Modulift user instructions

You may also need: matched Green Pin shackles and top slings, available to hire. Shackles are not included.

Documents (2)

View on this page or download.

PDFUser Instructions
PDF document
PDFInspection Guide
PDF document

Using and looking after it

Always read the manufacturer’s instructions before use. See the documents

Typical Applications
  • Two-point lifts of long or flexible loads
  • Lifts where slings must stay clear of the load
  • Low-headroom lifts
  • Plant, modules, precast and steelwork

Buying guide

Design & Construction

A Modulift beam is a strut (tube) with an end unit bolted to each end. Top slings run from the crane hook to the end units; the load hangs from the drop links below. Changing struts changes the span.

The sling-to-vertical (STV) angle is the angle between each top sling and vertical. The flatter the slings, the more compression goes into the beam, so the rating falls as the angle opens.

Longer top slings reduce the angle and keep more capacity.

Choosing the Right Size

Tell us the load weight, the span between lifting points and the headroom available, and we will confirm the span, configuration and sling lengths. For lifts up to 400 t, the MOD 400/400 is also on hire.

Questions and answers

Q: Is it supplied assembled?

A: It comes as a complete set of components for your span, with nuts and bolts, to assemble following the Modulift instructions.

Q: Are shackles included?

A: No. Matched Green Pin shackles can be hired; ask for the right sizes for your span.

Q: How is hire charged?

A: By the week; seven days costs one week and the minimum hire is one week.

Have a question about this product?Ask a question

More in Modulift

View all →