In stock - ready to dispatch
The Pramac MX 15/40 LFP brings battery storage to three-phase sites: 15 kVA at 400/230 V from 38.4 kWh of lithium iron phosphate cells. It supplies 400 V distribution boards and plant quietly, with no fuel or exhaust at the point of use.
It gives 32.8 kWh usable energy, a 30 kW peak for motor starting and a 63 A pass-through.
Solar panels, generator and site distribution are not included.
You may also need: the Pramac MX 30/60 LFP or the Pramac SX Plus 10/40 LFP if your load or run time differs.
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
Two figures matter. kVA is the power the unit can deliver at once; kWh is the energy stored, which sets how long it lasts. Usable energy is quoted at 90% depth of discharge (DoD, how far the battery is drained) measured on the AC side, so it allows for inverter losses.
Divide usable kWh by your average load in kW for an estimated run time.
Peak output (30 kW for 5 seconds here) covers the brief surge as motors and compressors start. Pass-through (63 A) is the current a generator or mains supply can feed through the unit to your loads while it recharges the battery.
The cells are lithium iron phosphate (LFP), a lithium chemistry that is more thermally stable and longer lived than standard lithium-ion, with a 6,000-cycle design life. MPPT (maximum power point tracking) is a solar charge controller that gets the most from panels as light changes, so they can charge the battery directly.
On a hybrid site the battery carries the load through quiet periods and the generator runs only to recharge.
Size on your 24-hour energy use in kWh, not only the peak load. A site drawing 3 kW for 16 hours needs 48 kWh, however small its peak.
| Model | Output | Usable energy | Peak (5 s) | Phase | Pass-through |
|---|---|---|---|---|---|
| SX 5/10 | 5 kVA | 8.3 kWh | 9 kW | Single | 32 A |
| SX 10/15 | 10 kVA | 12.4 kWh | 18 kW | Single | 32 A |
| SX Plus 5/25 | 5 kVA | 20.5 kWh | 10 kW | Single | 50 A |
| SX Plus 10/40 | 10 kVA | 33.2 kWh | 20 kW | Single | 80 A |
| MX 15/40 | 15 kVA | 32.8 kWh | 30 kW | Three | 63 A |
| MX 30/60 | 30 kVA | 49.8 kWh | 60 kW | Three | 63 A |
| LX 45/80 | 45 kVA | 66.4 kWh | 75 kW | Three | 100 A |
| LX 45/100 | 45 kVA | 82.9 kWh | 75 kW | Three | 100 A |
| LX 60/100 | 60 kVA | 82.9 kWh | 120 kW | Three | 125 A |
| LX Plus 90/150 | 90 kVA | 124.4 kWh | 150 kW | Three | 200 A |
A: Short starting surges from motors and compressors, for up to 5 seconds, while the continuous load stays within 15 kVA.
A: On a light, predictable load with mains or solar to recharge it, yes. On most sites the practical answer is hybrid: the battery plus a smaller generator running a few hours a day.
A: No. Stage V is an engine emissions standard, and the unit has no engine. On hybrid sites, pair it with a Stage V generator.
A: Yes. The MPPT solar input is fitted as standard, so panels connect directly without a separate charge controller.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account

Pramac is an Italian maker of generators, battery energy storage, lighting towers and material handling equipment. It grew from a construction equipment company founded by the Campinoti family in 1966. Pramac is based in Casole d'Elsa, near Siena, and has been part of the Generac group since 2016.
See all Pramac products →