The Pramac SX Plus 10/40 LFP is the largest single-phase unit in the Pramac BESS range, with 10 kVA continuous output and 38.4 kWh of lithium iron phosphate storage.
It runs heavier 230 V site loads for long periods with no fuel burnt where it stands.
Eight 4.8 kWh modules give 33.2 kWh usable, and an 80 A pass-through lets a generator or mains supply feed the load while the battery charges.
Solar panels, generator and site distribution are not included.
You may also need: the Pramac SX Plus 5/25 LFP or the Pramac MX 15/40 LFP if your load or run time differs.
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
Two figures matter. kVA is the power the unit can deliver at once; kWh is the energy stored, which sets how long it lasts. Usable energy is quoted at 90% depth of discharge (DoD, how far the battery is drained) measured on the AC side, so it allows for inverter losses.
Divide usable kWh by your average load in kW for an estimated run time.
Peak output (20 kW for 5 seconds here) covers the brief surge as motors and compressors start. Pass-through (80 A) is the current a generator or mains supply can feed through the unit to your loads while it recharges the battery.
The cells are lithium iron phosphate (LFP), a lithium chemistry that is more thermally stable and longer lived than standard lithium-ion, with a 6,000-cycle design life. MPPT (maximum power point tracking) is a solar charge controller that gets the most from panels as light changes, so they can charge the battery directly.
On a hybrid site the battery carries the load through quiet periods and the generator runs only to recharge.
Size on your 24-hour energy use in kWh, not only the peak load. A site drawing 3 kW for 16 hours needs 48 kWh, however small its peak.
| Model | Output | Usable energy | Peak (5 s) | Phase | Pass-through |
|---|---|---|---|---|---|
| SX 5/10 | 5 kVA | 8.3 kWh | 9 kW | Single | 32 A |
| SX 10/15 | 10 kVA | 12.4 kWh | 18 kW | Single | 32 A |
| SX Plus 5/25 | 5 kVA | 20.5 kWh | 10 kW | Single | 50 A |
| SX Plus 10/40 | 10 kVA | 33.2 kWh | 20 kW | Single | 80 A |
| MX 15/40 | 15 kVA | 32.8 kWh | 30 kW | Three | 63 A |
| MX 30/60 | 30 kVA | 49.8 kWh | 60 kW | Three | 63 A |
| LX 45/80 | 45 kVA | 66.4 kWh | 75 kW | Three | 100 A |
| LX 45/100 | 45 kVA | 82.9 kWh | 75 kW | Three | 100 A |
| LX 60/100 | 60 kVA | 82.9 kWh | 120 kW | Three | 125 A |
| LX Plus 90/150 | 90 kVA | 124.4 kWh | 150 kW | Three | 200 A |
A: If your loads are all 230 V, this single-phase unit suits. If you have 400 V plant or a three-phase distribution board, look at the MX 15/40, which has the same 38.4 kWh storage.
A: On a light, predictable load with mains or solar to recharge it, yes. On most sites the practical answer is hybrid: the battery plus a smaller generator running a few hours a day.
A: No. Stage V is an engine emissions standard, and the unit has no engine. On hybrid sites, pair it with a Stage V generator.
A: Yes. The MPPT solar input is fitted as standard, so panels connect directly without a separate charge controller.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account

Pramac is an Italian maker of generators, battery energy storage, lighting towers and material handling equipment. It grew from a construction equipment company founded by the Campinoti family in 1966. Pramac is based in Casole d'Elsa, near Siena, and has been part of the Generac group since 2016.
See all Pramac products →