Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Pramac SX Plus 5/25 LFP

Pramac SX Plus 5/25 LFP

Part no. PRAMAC-SX-PLUS-5-25-LFP
Price
Price on application
Tell us what you need and we will come back with a quote the same working day.

About this item

  • 5kVA output with 24kWh lithium iron phosphate (LFP) battery storage
  • 230V 50Hz single-phase supply with UK socket panel fitted
  • MPPT solar input for direct panel charging; silent with no fuel or emissions in use

Product description

The Pramac SX Plus 5/25 LFP pairs a modest 5 kVA single-phase output with a large 24 kWh lithium iron phosphate battery.

It is built for small loads that need to run for a long time, such as welfare units overnight or a site office through a weekend.

Five 4.8 kWh battery modules give 20.5 kWh usable, about two and a half times the SX 5/10, with a 50 A pass-through.

Key Features
  • 24 kWh installed, 20.5 kWh usable
  • 5 kVA continuous, 10 kW peak for 5 seconds
  • 50 A pass-through for generator or mains feed
  • 56.7 dB(A) at 1 m, no fuel in use
  • MPPT solar input and UK socket panel

Specifications

ModelSX Plus 5/25 LFP
Continuous output5 kVA
Peak output (5 s)10 kW
Supply230 V 50 Hz single phase
Storage capacity24 kWh
Usable energy (90% DoD, AC side)20.5 kWh
Battery chemistryLithium iron phosphate (LFP)
Battery modules5 x 4.8 kWh, 48 V DC
Battery weight200 kg
Inverters1 x 5 kVA
Noise56.7 dB(A) LpA at 1 m
Input connections1 x 16 A CEE 2P+T (grid), 1 x 32 A CEE 2P+T (generator)
Outputs (Pramac standard panel)1 x 16 A Schuko, 2 x 16 A CEE 2P+T, 1 x 32 A CEE 2P+T; individual RCD per socket
ControlsGSM remote monitoring, automatic generator start signal, inverter protection (short circuit, overload, over-temperature, low battery), battery isolator
OtherStackable 2 high; 50/60 Hz; cold weather kit option
Design life6,000 cycles
Pass-through capacity50 A
ProtectionIP44
Operating temperature-10 to +50 °C
Configuration+HUK (UK socket panel) +MPPT (solar input)
Dimensions (L x W x H)1,077 x 1,105 x 1,130 mm
Weight502 kg
What's Included
  • Pramac SX Plus 5/25 LFP battery energy storage unit
  • UK socket panel (HUK) fitted
  • MPPT solar input fitted
  • Operator and commissioning documentation

Solar panels, generator and site distribution are not included.

You may also need: the Pramac SX Plus 10/40 LFP or the Pramac SX 5/10 LFP if your load or run time differs.

Documents (1)

View on this page or download.

PDFProduct card
PDF document

Using and looking after it

Always read the manufacturer’s instructions before use. See the documents

Typical Applications
  • Welfare units running through the night
  • Remote site offices with solar charging
  • Security, CCTV and lighting over long periods
  • Hybrid sites where the generator runs a few hours a day

Buying guide

Design & Construction

Two figures matter. kVA is the power the unit can deliver at once; kWh is the energy stored, which sets how long it lasts. Usable energy is quoted at 90% depth of discharge (DoD, how far the battery is drained) measured on the AC side, so it allows for inverter losses.

Divide usable kWh by your average load in kW for an estimated run time.

Peak output (10 kW for 5 seconds here) covers the brief surge as motors and compressors start. Pass-through (50 A) is the current a generator or mains supply can feed through the unit to your loads while it recharges the battery.

The cells are lithium iron phosphate (LFP), a lithium chemistry that is more thermally stable and longer lived than standard lithium-ion, with a 6,000-cycle design life. MPPT (maximum power point tracking) is a solar charge controller that gets the most from panels as light changes, so they can charge the battery directly.

On a hybrid site the battery carries the load through quiet periods and the generator runs only to recharge.

Choosing the Right Model

Size on your 24-hour energy use in kWh, not only the peak load. A site drawing 3 kW for 16 hours needs 48 kWh, however small its peak.

Model Output Usable energy Peak (5 s) Phase Pass-through
SX 5/10 5 kVA 8.3 kWh 9 kW Single 32 A
SX 10/15 10 kVA 12.4 kWh 18 kW Single 32 A
SX Plus 5/25 5 kVA 20.5 kWh 10 kW Single 50 A
SX Plus 10/40 10 kVA 33.2 kWh 20 kW Single 80 A
MX 15/40 15 kVA 32.8 kWh 30 kW Three 63 A
MX 30/60 30 kVA 49.8 kWh 60 kW Three 63 A
LX 45/80 45 kVA 66.4 kWh 75 kW Three 100 A
LX 45/100 45 kVA 82.9 kWh 75 kW Three 100 A
LX 60/100 60 kVA 82.9 kWh 120 kW Three 125 A
LX Plus 90/150 90 kVA 124.4 kWh 150 kW Three 200 A

Questions and answers

Q: Why choose 5 kVA with 24 kWh?

A: Because many site loads are small but long. A 1.5 kW average load runs for around 13 hours from 20.5 kWh, with the 5 kVA output still covering short peaks.

Q: Can it replace a generator entirely?

A: On a light, predictable load with mains or solar to recharge it, yes. On most sites the practical answer is hybrid: the battery plus a smaller generator running a few hours a day.

Q: Does Stage V apply to it?

A: No. Stage V is an engine emissions standard, and the unit has no engine. On hybrid sites, pair it with a Stage V generator.

Have a question about this product?Ask a question

More in Battery Energy Storage Systems

View all →