Steerman SX10R Rear Section, 5t Capacity

Model SX10R | Adjustable Rear Pair | 5t Capacity | Twin Polyamide Rollers | Tie Rod Connected

The Steerman SX10R is the 5t rear section from the Steerman SX/S range, supplied as a matched pair of skates joined by an adjustable tie rod that keeps both rear skates parallel and at the correct spacing for the load. It runs on twin rollers of abrasion-resistant elastic polyamide with universal joint suspension, pairing with the matching SX10F front section to make up the complete SX10 system — or sold separately for bespoke configurations.

Key Features

• Pair of skates with adjustable tie rod — two skates joined by a tie rod for stable load support; tie rod adjusts to suit load width
• Twin polyamide rollers — abrasion-resistant elastic material, high chemical resistance, protected against breakage, won't damage normal floor coverings
• Universal joint roller suspension — maintains positive contact on slightly uneven floors
• 5t rear capacity — takes the rear-distributed share of the SX10 system load
• Spare parts and full system support — rollers, axles, frames and bearings sold individually for maintenance

Technical Specifications

More About This Product

The SX10R fixed-wheel rear section has a capacity of 5t, running on rollers of Abrasion-resistant elastic polyamide at 82mm diameter. Configuration: Pair of skates joined by adjustable tie rod. Pairs with SX10F front section (for SX10 complete system) to form a complete load moving set.

Suitable Applications

The SX10R is the rear half of the SX10 Steerman SX/S system. The pair of skates with adjustable tie rod follows the steerable front's path with stable two-point ground contact. Suits professional industrial moves where heavy loads are moved through workshops, machine shops, plant rooms and on-site installation work.

How to Use the Rear Section

1. Confirm the 5t rear capacity is suitable for the rear-distributed share of the intended load.
2. Adjust the tie rod to match the load width — both rear skates should run parallel and centred on the load.
3. Position the rear pair under the rear of the load using rated jacking equipment.
4. Position the matching SX10F front section under the front of the load.
5. Lower the load onto both sections and confirm stable contact.
6. The rear pair will follow the front's steered path during the move — keep personnel clear on both sides.

Warning:
Do not exceed the 5t rated rear capacity. The matched front must be present and steered by a qualified operator. Keep the rear pair parallel to the line of direction throughout the move.

Safety Information

• Always pair with the matching SX10F front section at the correct capacity.
• Confirm the tie rod adjustment is correct for the load width and locked in place.
• Inspect the frame, rollers and tie rod attachment before each use.
• Do not allow personnel to stand behind the rear pair during transport.
• Use spotters where the load obscures the rear pair's rolling path.

Inspection and Maintenance

Maintenance-free in normal use. Inspect weekly with attention to roller polyamide condition, roller bearings, axles, tie rod attachment and frame weld points. Replace worn rollers using genuine Steerman spare parts.

Frequently Asked Questions

Documents

• Steerman SX/S Datasheet (PDF)
• Operating Manual (PDF)