The Eichinger 2016 Forklift Concrete Skip carries and pours wet concrete on the forks of a forklift or telehandler, for sites where there is no crane.
Its low, square body has a side outlet with a lever-operated gate, and a sloped floor so the concrete runs out without tilting the forks.
A hose outlet for a tremie hose is available as an option. Choose 350, 500 or 1,000 litres. For rubble and general site waste rather than concrete, see our waste skips. Made in Germany by Florian Eichinger GmbH.
The skip slides onto the forks through stacker shoes (fork pockets) at the rear or side. A restraint chain then secures the skip to the forklift carriage so it cannot slide off in transit; Eichinger notes the chain is not designed to withstand impact loads.
Concrete leaves through a lateral (side) outlet. Pulling the lever opens the gate, and a safety plate covers the lever when travelling so it cannot be knocked open.
For columns or deeper formwork, the optional hose outlet takes a tremie hose, which guides the concrete down into the pour instead of letting it drop and separate.
Check that your forklift's rated capacity at its load centre covers the skip weight plus the SWL.
| Size | SWL | Skip + load | Best suited to |
|---|---|---|---|
| 350 L (2016.5) | 800 kg | 950 kg | Small domestic pours, footings and smaller forklifts |
| 500 L (2016.8) | 1,200 kg | 1,370 kg | Drainage runs, bases and general groundworks |
| 1,000 L (2016.12) | 2,000 kg | 2,210 kg | Ground floor slabs and larger commercial pours by telehandler |
If the pour needs a crane, see the Eichinger 1034C column skip and the rest of our concrete skips.
Choose a size above to see its specifications.
| Model | Capacity | SWL | Height | Width | Length | Weight |
|---|---|---|---|---|---|---|
| 2016.5 | 350 L | 800 kg | 650 mm | 1,042 mm | 1,110 mm | 150 kg |
| 2016.8 | 500 L | 1,200 kg | 730 mm | 1,042 mm | 1,110 mm | 170 kg |
| 2016.12 | 1,000 L | 2,000 kg | 1,035 mm | 1,190 mm | 1,656 mm | 210 kg |
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
A: No. It has no certified lifting lugs and is for fork-mounted use only. For crane work, see the Eichinger 1034C column skip.
A: No. The floor is sloped towards the outlet, so pulling the gate lever is enough.
A: Not as standard. Eichinger lists the hose outlet as an option, so ask for it when ordering.
A: Yes. It can be lifted from the rear or the side. Note where the gate lever sits if you use the side pockets.