The STAHL CraneSystems ST10 is the 500 kg to 1,000 kg frame of the STAHL ST electric chain hoist programme, covering the busiest part of general handling.
Both capacities come with a choice of two lifting speeds, so you can trade cycle time against motor size without moving up a frame.
Every build has two-speed lifting, slipping clutch overload protection and an IP55 enclosure, and is built to your choice of speed, suspension and lift height up to 10 m online.
Choose a size above to see its specifications.
| Capacity | Hoist type | Falls | Lifting speed | Motor | Duty (%ED) | Starts/hour | ISO group |
|---|---|---|---|---|---|---|---|
| 500 kg | ST 1005-8/2 | 1 | 8 / 2 m/min | 0.8 / 0.2 kW | 40 / 20 | 120 / 240 | M4 |
| 500 kg | ST 1005-12/3 | 1 | 12 / 3 m/min | 1.2 / 0.3 kW | 40 / 20 | 120 / 240 | M4 |
| 1,000 kg | ST 1005-8/2 | 2 | 4 / 1 m/min | 0.8 / 0.2 kW | 40 / 20 | 120 / 240 | M4 |
| 1,000 kg | ST 1005-12/3 | 2 | 6 / 1.5 m/min | 1.2 / 0.3 kW | 40 / 20 | 120 / 240 | M4 |
Supply 380 to 415 V, 50 Hz three-phase. Control voltage 48 V AC. Enclosure IP55; pendant IP65. Lift heights 3, 4, 5, 6, 8 and 10 m online; STAHL lists hook paths up to 60 m on a single fall or 30 m on two falls, depending on the chain collector. Trolley flange range: push trolley 42 to 180 mm at 500 kg, 58 to 300 mm at 1,000 kg; electric trolley 58 to 300 mm. Made by STAHL CraneSystems GmbH (Columbus McKinnon group) under an ISO 9001 quality system; CE marked.
Each hoist is built to the configuration you select and comes with:
Either side of this frame sit the ST05 (from 125 kg) and the ST20 (1,000 kg to 2,000 kg).
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
An electric motor drives a chain wheel that winds the load chain. The pendant gives a fast speed for covering the height and a creep speed, a quarter as fast, for setting the load down accurately.
A brake holds the load when the motor stops.
On the lower capacity the hook hangs on a single fall of chain; on the higher capacity the chain runs down through a bottom block and back up (two falls), lifting twice the load at half the speed. The slipping clutch limits how hard the hoist can pull, protecting it and the structure.
The ISO group (M3, M4, M5) is the duty rating: higher means more lifts and longer running time.
| Capacity | Hoist type | Falls | Lifting speed | ISO group | Best for |
|---|---|---|---|---|---|
| 500 kg | ST 1005-8/2 | 1 | 8 / 2 m/min | M4 | Standard speed general handling |
| 500 kg | ST 1005-12/3 | 1 | 12 / 3 m/min | M4 | Faster cycles on production lines |
| 1,000 kg | ST 1005-8/2 | 2 | 4 / 1 m/min | M4 | Heavier loads with fine placing |
| 1,000 kg | ST 1005-12/3 | 2 | 6 / 1.5 m/min | M4 | Heavier loads where speed matters |
Then choose the suspension: a hook for a fixed position, a push trolley to move along a beam by hand, or an electric trolley (20 m/min, or two-speed 20/5 m/min). The push trolley suits runway flanges 42 to 180 mm at 500 kg and 58 to 300 mm at 1,000 kg; the electric trolley suits 58 to 300 mm, so confirm your beam flange width when ordering.
Lift heights from 3 m to 10 m can be selected online; longer lifts are quoted on request.
A: Three-phase 380 to 415 V, 50 Hz. The pendant runs on a 48 V AC control circuit.
A: Up to 10 m can be selected online. STAHL lists hook paths for the ST10 of up to 60 m on a single fall or 30 m on two falls with the right chain collector, so contact us for a longer lift.
A: No. A collector sized to your lift height is included with every configuration.
A: Both a top hook cut-off and a combined top and bottom cut-off are available, plus slow-down and stop travel limits for powered trolleys.

Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
STAHL CraneSystems makes wire rope hoists, chain hoists, winches and crane components in Künzelsau, Germany. The business traces back to a workshop founded in Stuttgart in 1876 and is known for explosion-protected lifting equipment. It has been part of Columbus McKinnon (CMCO) since 2017.
See all STAHL products →