The STAHL CraneSystems ST50 is the largest frame of the ST electric chain hoist range offered here, lifting 2,500 kg on a single fall or 5,000 kg on two falls.
Lifting speeds run from 3/0.75 to 8/2 m/min, with lift heights from 3 m to 10 m selectable online and longer lifts on request.
Choose hook, push trolley or electric trolley suspension at 2,500 kg; at 5,000 kg it runs on a hook or an electric trolley.
Choose a size above to see its specifications.
| Capacity | Hoist type | Falls | Lifting speed | Motor | Duty (%ED) | Starts/hour | ISO group |
|---|---|---|---|---|---|---|---|
| 2,500 kg | ST 5025-6/1.5 | 1 | 6 / 1.5 m/min | 3.0 / 0.76 kW | 40 / 20 | 120 / 240 | M4 |
| 2,500 kg | ST 5025-8/2 | 1 | 8 / 2 m/min | 3.8 / 0.9 kW | 33 / 17 | 100 / 200 | M4 |
| 5,000 kg | ST 5025-6/1.5 | 2 | 3 / 0.75 m/min | 3.0 / 0.76 kW | 40 / 20 | 120 / 240 | M4 |
| 5,000 kg | ST 5025-8/2 | 2 | 4 / 1 m/min | 3.8 / 0.9 kW | 33 / 17 | 100 / 200 | M4 |
| Supply / control voltage | 380 to 415 V, 50 Hz three-phase / 48 V AC |
|---|---|
| Lift height | 3, 4, 5, 6, 8 or 10 m online; up to 50 m single fall or 25 m two fall on request (STAHL hook path, depending on chain collector) |
| Trolley flange width, 2,500 kg | Push and electric trolley 66 to 300 mm |
| Trolley flange width, 5,000 kg | Electric trolley 82 to 300 mm (no push trolley) |
| Electric trolley speed | 20 m/min or 20/5 m/min |
| Protection | Hoist IP55; pendant IP65 |
| Overload protection | Slipping clutch |
| Load chain | Electro-galvanised |
| Standards | CE marked; made under ISO 9001; ATEX/IECEx Ex versions on request |
Limit switches (top, or top and bottom hook cut-off) and trolley travel limits are available as options.
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
Most chain hoists hang from a bracket bolted to the housing. On the ST, the suspension is part of the chain guide, which is machined from solid cast iron, so the load path runs straight from the hook to the suspension point and not through the housing.
Two falls means the chain runs down to a bottom block and back up, so the hoist lifts twice the load at half the speed. That is how the same ST 5025 hoist gives 2,500 kg at 6/1.5 or 8/2 m/min on one fall, and 5,000 kg at 3/0.75 or 4/1 m/min on two.
The ISO duty group (M4 here) and %ED (the share of each hour the motor may run) set how hard the hoist can work. The slipping clutch limits the load the hoist can lift, protecting the hoist and the structure it hangs from.
| Capacity | Speed | Suspension available | Best suited to |
|---|---|---|---|
| 2,500 kg | 6/1.5 or 8/2 m/min | Hook, push trolley, electric trolley | Workshop jib and gantry cranes, machine loading |
| 5,000 kg | 3/0.75 or 4/1 m/min | Hook, electric trolley | Heavy dies, moulds and plant components |
Pick the faster speed for frequent lifts and long travel; the slower option gives more running time per hour (higher %ED). For loads up to 6,300 kg, STAHL's ST60 is available on request; for lighter loads at M5 duty, the ST32 lifts up to 3,200 kg.
A: STAHL does not offer a push trolley at 5,000 kg. Use hook suspension or a powered electric trolley.
A: No. The collector is included and sized to the lift height you select.
A: Yes. STAHL lists hook paths up to 50 m on one fall or 25 m on two falls with the right collector. Ask us for a quote.
A: Yes. STAHL offers the ST as an ST Ex version for Zone 1, Zone 21 and Zone 22. Ex builds have their own data, so ask for a quote.

Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
STAHL CraneSystems makes wire rope hoists, chain hoists, winches and crane components in Künzelsau, Germany. The business traces back to a workshop founded in Stuttgart in 1876 and is known for explosion-protected lifting equipment. It has been part of Columbus McKinnon (CMCO) since 2017.
See all STAHL products →