The GT PML is a permanent magnetic lifter for steel plate and round bar, with no power supply needed.
Neodymium magnets are switched on and off by turning the handle, which locks in the ON position. Stocked from 100 kg to 6,000 kg plate capacity, conforming to BS EN 13155.
Our lifting attachments range also includes the lever-operated Camlok TPM magnets.
Choose a size above to see its specifications.
| Code | Part no. | Plate capacity | Cylindrical capacity | Tear-off force | H | I | L | W | Weight |
|---|---|---|---|---|---|---|---|---|---|
| PML100 | PML-1 | 100 kg | 30 kg | 350 kg | 70 | 142 | 92 | 64 | 3 kg |
| PML300 | PML-3 | 300 kg | 100 kg | 1,050 kg | 96 | 176 | 165 | 88 | 10 kg |
| PML600 | PML-6 | 600 kg | 200 kg | 2,100 kg | 120 | 219 | 236 | 118 | 24 kg |
| PML1000 | PML-10 | 1,000 kg | 300 kg | 3,500 kg | 168 | 266 | 264 | 168 | 50 kg |
| PML2000 | PML-20 | 2,000 kg | 600 kg | 7,000 kg | 217 | 462 | 378 | 230 | 125 kg |
| PML3000 | PML-30 | 3,000 kg | 1,000 kg | 10,500 kg | 265 | 567 | 453 | 290 | 220 kg |
| PML6000 | PML-60 | 6,000 kg | 2,000 kg | 19,200 kg | 265 | 707 | 713 | 290 | 398 kg |
Dimensions in mm: H is the body height (excluding the lifting eye), W the body width, L the body length (excluding the handle housing) and I the handle length from its pivot. Tear-off force is the force needed to pull the magnet off ideal plate, not a working load.
Always read the manufacturer’s instructions before use.
To engage, turn the handle from OFF to ON until the slide key passes the stop pin and locks. To release, press the handle button and turn back to OFF.
The rated capacity is a best case on clean, flat, thick enough low-carbon steel plate. Thinner plate, an air gap from surface roughness above Ra 6.3 µm, rust or dirt reduce it; check the curves printed on the lifter.
Material factors: 0.95 medium-carbon, 0.90 high-carbon, 0.75 low-alloy, 0.50 cast iron. Round work is about 30% of the plate rating, with the bar in contact with the V slot.
A: The force needed to break the magnet away from ideal plate in a test. It is shown for reference; always work to the plate or cylindrical capacity.
A: Yes, at 50% of the plate capacity.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
GT Lifting is the trading name of George Taylor and Company Lifting Gear, a UK supplier and maker of lifting equipment. The company was formed in 1974, but its roots go back to a blacksmith's shop in the UK, in 1832. Its own-label range includes hoists, clamps, blocks, skates and winches.
See all GT products →