The PX25 is the full-capacity weighing truck in the Lifter range, carrying 2500kg on 1185 x 555mm forks with an integrated weighing system. The extra fork length and width over the PY20 accommodate the weighing frame while still handling standard and wide pallets, and the 2500kg rating means it can be used as a general-purpose truck as well as a weighing one, rather than sitting idle between weighings.
Manufacturer Assurance
Lifter by Pramac is backed by over 40 years of material handling equipment manufacture. All Lifter by Pramac products are designed to meet 100% compliance with current standard regulations, and are subject to internal quality testing for reliability and durability.
Technical Specifications
| Model |
Fork Length |
Fork Width |
Lift Height |
Overall Length |
Aisle Width |
| PX25 1185x555 |
1185 |
555 |
115 |
1596 |
1851 |
The same 1185 x 555mm platform is used for the Agile and Agile EVO powered weighing trucks, if you later want the same weighing function with powered travel.
Key Features
- 2500kg capacity — the full range rating, so the truck doubles as a standard pallet truck between weighings.
- Integrated weighing — the weight is read where the pallet stands, saving a trip to a floor scale.
- 1185 x 555mm forks — wider and longer than a standard truck to carry the weighing frame, while still entering conventional pallets.
- Poly tandem load rollers — the standard EVO roller arrangement, spreading load across four contact points.
- Powered versions available — the PX Agile and PX Agile EVO offer the same weighing function with powered travel and lift.
Suitable Applications
Specify the PX25 where weighing is frequent and loads run to the full 2500kg: goods-in on a busy inbound bay, despatch weighing for freight, production and batch control, and waste and recycling transfer. Because it carries full capacity it can serve as a general truck too, which suits smaller operations that cannot justify a dedicated weighing unit. Where loads are lighter, the PY20 is the cheaper option; where the weight must be printed, specify the GS EVO weigh scale with printer.
How to Use
- Check the load is within the rated capacity and the pallet is sound.
- Set the tiller control to lower and bring the forks fully down.
- Enter the pallet squarely and drive the forks fully home.
- Select lift and raise the load clear of the floor.
- Move with the control in neutral, pulling rather than pushing where the route allows.
- Lower, release the load and withdraw the forks squarely.
Warning: Weigh on level ground with the load stable and the forks clear. Do not rely on the scale for trade use unless the unit is verified for that purpose.
Safety Information
- Only trained operators should use a pallet truck.
- Keep feet clear of the load wheels and the underside of the forks.
- Never ride on the truck or carry passengers.
- Do not lift loads that are unstable, overhanging or unevenly distributed.
- Withdraw from service if the forks creep down under load or the hydraulic unit leaks.
- Store with the forks fully lowered.
Inspection and Maintenance
Alongside the normal checks, protect the display and load cells and keep the truck out of washdown unless it is the stainless GS/P version. Calibrate at your quality system interval and keep the record. Under PUWER, keep an inspection record and withdraw anything that fails.
What's Included
- PX25 weigh scale hand pallet truck
- Integrated weighing display and load cells
- Operator manual and calibration documentation
Frequently Asked Questions
Q: How accurate are the scales?
Accuracy class and calibration status vary by model and by whether the unit is bought trade-approved. Confirm the class you need before ordering: weighing for internal control is a different requirement from weighing for sale by weight.
Q: Do I need a trade-approved scale?
If the weight determines what a customer pays, yes, and it must be verified. For internal stock control, goods-in checking or freight pre-check, a non-approved scale is normally sufficient.
Q: Can the scale be recalibrated on site?
Calibration is carried out by a competent scale engineer. Build it into your planned maintenance rather than treating it as a repair.
Q: Is there a stainless version?
Yes. The Inox and Galv range includes a GS/P 25S4 1185x555 INOX weighing truck for washdown and food production areas.
