Two engine-driven pressure washers for work away from mains power. The PW240 is the higher-pressure machine at 240 bar on a Honda GX390 with a direct drive pump, recoil start and 64kg dry weight. The PW3000 trades pressure for endurance: 200 bar from a Yanmar L100 diesel with a geared drive pump and electric start, at 117kg. Geared drive runs the pump below engine speed, which is the specification for sustained daily use rather than intermittent work. Both are supplied with gun, lance and pressure hose.
Emissions Compliance
Stage V certified. Every model in this range meets the Stage V non-road mobile machinery emissions standard, which is a condition of entry on many local authority, London and principal contractor sites.
Specification
| Specification |
Value |
| Model |
PW3000 |
| Product Code |
NC3000Y4000 |
| Fuel |
Diesel |
| Engine Brand |
Yanmar L100 |
| Standby / Max Power |
200 BAR / 2900 PSI |
| Continuous Power (COP) |
15 L/M |
| Starting System |
Electric |
| Run Time |
3.60 @75% |
| Dimensions (L x W x H) |
1040x590x790 |
| Weight |
117 |
| Socket Configuration |
Geared drive pump |
| Notes |
Includes gun, lance, pressure hose |
The PW240 and PW3000 Professional Pressure Washers Range
| Model |
Product Code |
Fuel |
Max Pressure |
Max Flow |
Engine |
Start |
Pump Drive |
Run Time |
Dimensions |
Weight |
| PW240 |
NA2400H1000 |
Petrol |
240 bar / 3500 psi |
15.1 l/min |
Honda GX390 |
Recoil |
Direct |
3.00 h @75% |
951x765x655 |
64 kg |
| PW3000 |
NC3000Y4000 |
Diesel |
200 bar / 2900 psi |
15.0 l/min |
Yanmar L100 |
Electric |
Geared |
3.60 h @75% |
1040x590x790 |
117 kg |
Both are supplied with gun, lance and pressure hose as standard. The PW3000 also includes a suction hose with strainer for drawing from a tank or open water.
Key Features
- 240 bar on the PW240 — the higher pressure of the two, for paint, coating and stubborn contamination removal.
- Geared drive pump on the PW3000 — the pump runs below engine speed, which extends pump life substantially under sustained daily use.
- Diesel on the PW3000 — lower running cost per hour and longer engine life, which is what justifies the extra weight on a machine used all day.
- Suction hose with strainer on the PW3000 — draws from a tank, bowser or open water rather than requiring a mains feed.
- Gun, lance and hose included — ready to work rather than needing accessories bought separately.
- Trolley mounted — both are supplied on a trolley, at 64kg and 117kg dry weight respectively.
Suitable Applications
The PW240 suits mobile valeting, agricultural and equestrian cleaning, plant and vehicle washing, and general site and grounds maintenance where high pressure matters more than run time. The PW3000 is the machine for sustained daily work — contract cleaning, food and agricultural premises, plant hire yards, and anywhere the washer runs for hours rather than minutes. The suction hose makes it viable where there is no mains water, which is often the point on a farm or a remote site.
How to Use
- Site the machine in the open air on firm level ground.
- Connect the water supply, or the suction hose and strainer on the PW3000, and confirm adequate flow.
- Connect the pressure hose, gun and lance and check all couplings are secure.
- Check engine oil and fuel, then start and allow the engine to stabilise.
- Never run the pump dry; confirm water is flowing before applying load.
- Release pressure through the gun before disconnecting anything, then shut down.
Warning: Never operate a generator indoors, in a partially enclosed space, or anywhere exhaust can reach an occupied area. Exhaust contains carbon monoxide, which is colourless, odourless and fatal. High pressure water can penetrate skin and cause serious injury that may not look serious at first. Never direct the lance at any person, and never attempt to seal a leaking coupling under pressure.
Safety Information
- Never direct the lance at people, animals, electrical equipment or the machine itself.
- Wear eye protection and suitable footwear; high pressure water throws debris.
- Never run the pump dry — it will destroy the seals in minutes.
- Release system pressure before disconnecting hoses or changing nozzles.
- Keep the machine and its exhaust clear of the work area and away from what you are washing.
- Do not use on asbestos, lead paint or other hazardous coatings without proper controls.
Inspection and Maintenance
Check the pump oil, engine oil, filters and all hose couplings before use. The inlet strainer must be kept clean — a blocked strainer starves the pump and is the most common cause of premature failure. Drain and protect against frost in winter, since ice will crack a pump body. Follow the engine manufacturer's service schedule by running hours.
What's Included
- Pressure washer on trolley in the model ordered
- Gun, lance and pressure hose
- Suction hose with strainer (PW3000 only)
- Operator manual and engine documentation
Frequently Asked Questions
Q: Which one should I buy?
PW240 for higher pressure and lighter weight on intermittent work. PW3000 for diesel economy, a geared drive pump and sustained daily use. Flow is almost identical at around 15 l/min.
Q: What does geared drive give me?
The pump turns more slowly than the engine, which reduces wear and extends pump life considerably under continuous use. Direct drive is simpler and lighter but works the pump harder.
Q: Can it draw from a tank?
The PW3000 is supplied with a suction hose and strainer for drawing from a tank, bowser or open water. Check the PW240 arrangement before relying on it for that.
Q: Is anything else needed to start work?
No. Both come with gun, lance and pressure hose. You will need a water supply and fuel.
