The STAHL CraneSystems AS 7 is STAHL's heavy-duty electric wire rope hoist for the upper capacity range up to 125,000 kg.
Motor, gearbox and rope drum are arranged one behind the other on one axis. This central gear concept gives high performance with a narrow build that is particularly useful in systems building and confined spaces.
It works as a stationary lifting or towing unit at different installation angles and rope lead-offs, on an OE double rail crab on double girder cranes, or as the AS 7 ZW twin hoist for higher capacity, faster hoisting and greater lifting height.
This is an enquiry-only product: send us your load, lift and crane details and we will quote.
Capacity up to 125,000 kg. Standard supply 380 to 415 V 50 Hz or 440 to 480 V 60 Hz, all voltages optional. Hoist motor IP55 (IP66 optional), thermal class F, PTC thermistor control. Ambient -20 to +40 °C standard, -40 to +80 °C optional. Made by STAHL CraneSystems GmbH, Künzelsau, Germany. See the AS 7 brochure and overload protection sheet (Datasheets).
The AS 7 uses the proven SH load measurement principle in a redesigned, space-saving system. The free-floating gearbox is held on its mounting plate and a pressure sensor on the gearbox torque arm measures the load permanently, accurate to ±6 % of nominal load even in the low part-load range, at standstill and in active or passive measurement.
It meets Category 3, Performance Level d to EN 13849-1 and extends the hoist by 87 mm.
| Model | Load capacity | Reeving |
|---|---|---|
| Single-groove rope drum | 3,000 to 12,500 kg | 1/1 |
| Double-grooved rope drum | 6,300 to 12,500 kg | 2/2-1 |
| Double-grooved rope drum | 45,000 kg | 10/2-1 |
| Twin hoist | 40,000 to 80,000 kg | ZW 6/2-1 |
| Twin hoist | 80,000 to 100,000 kg | ZW 8/2-1 |
| Twin hoist | 100,000 to 125,000 kg | ZW 10/2-1 |
The TDC Twin Drive Concept adds two synchronised hoist motors with manually releasable brakes, so the load is held even if a gearbox fails, with up to 60 % higher capacity when not handling molten metal.
Magnetek IMPULSE VG+ hoist drive functions include encoder feedback, slack rope detection, brake check at stop, torque proving at start, dynamic braking, hook height measurement, phase loss detection, slip compensation, short-circuit protection, safe torque off and Micro-Speed. The IMPULSE G+ Mini travel drive adds Safe Operating Windows, Quick Stop, motor thermal overload protection, auto tuning and sway control, and is rated to EN 61800-5-2, EN 61508 and SIL2.
| Item | Standard | Optional |
|---|---|---|
| Ambient temperature | -20 °C to +40 °C | -40 °C to +80 °C |
| Protection (IEC/EN 60529) | IP55 | IP66 |
| Paint | Black-grey/yellow-green RAL 7021/6018, 60 to 80 µm | Any RAL colour, 120 to 320 µm, epoxy-resin base |
| Hoist motor control | Pole-changing or frequency controlled (2 to 100 %) | Frequency controlled (1 to 100 %) |
| Travel speed (50 Hz) | 5/20 m/min | 2.5/10 or 8/32 m/min; 2.5 to 25 or 4 to 40 m/min frequency controlled |
| Supply voltage | 380 to 415 V 50 Hz; 440 to 480 V 60 Hz | All voltages possible |
| Control | Crane manufacturer's control (no transformer or crane switch contactor) | Complete control with transformer and crane switch contactor |
| Control units | Not included | Control pendant or Magnetek radio remote control |
| Limit switches | Gear limit switch for top and bottom hook position plus operational top limit | Extra switching elements; travel limit switch |
| Overload cut-off | SLE | SMC Multicontroller |
| Hoist brake | Electromagnetic disc brake, asbestos-free linings | Manual brake release, rope drum brake, Twin Drive Concept redundancy, wear monitoring |
| Rope | Bright or galvanised to DIN EN 12385, safety factor usually 4.0 or more | Off-standard ropes, higher safety factor |
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
| Type | Load capacity up to | Standard reeving | Reeving for true vertical lift |
|---|---|---|---|
| ASR 7 | 32,000 kg | 4/1 | - |
| AS 7 | 45,000 kg | - | 10/2-1 |
| AS 7 | 50,000 kg | 2/1, 4/1 | 2/2, 4/2, 8/2 |
| AS 7 | 80,000 kg | 6/1 | - |
| AS 7 ZW (twin) | 125,000 kg | - | ZW 4/2-1, ZW 6/2-1, ZW 8/2-1, ZW 10/2-1 |
A single-grooved drum (1/1, 2/1, 4/1, 6/1) suits stationary hoisting or towing and use on a double rail crab. A double-grooved drum gives true vertical lift (2/2-1, 4/2-1, 8/2-1) or handles loads with more than one pick-up point (2/2-2, 4/2-2).
Other reevings on request.
As stationary equipment the AS 7 can be mounted at a wide range of angles and the rope guide can be rotated on the drum for different rope lead-off angles. With a bottom hook block, the hoist must be installed with its longitudinal axis horizontal.
This flexibility is why systems builders use it to move factory doors and storage and retrieval machines, or as a traversing hoist with several rope lead-offs in long goods storage.
Highly flexible special rope with a long service life, running in an enclosed rope guide of spheroidal graphite cast iron (GJS, previously GGG 40) that works at the highest and lowest temperatures. A 360° rope tensioner stops slack rope forming.
Suspended loads are monitored electronically all the time and the maximum load is limited by measuring at the rope anchorage, which works with multiple reeving too. SLE control and motor management gives condition monitoring as standard, suppresses inching to reduce stress, uses oversized contactors and monitors hoist and travel motor temperatures.
All gear stages are lubricated for life in an oil bath and run quietly. The asbestos-free brake needs no adjustment, is oversized for long life and can be inspected from outside (IP65, IP66 optional).
The hoisting motor is a special-purpose FEM/ISO classified motor rated for high duty cycles and switching frequency, IP55 (IP66 optional), thermal class F, mounted outside the rope drum for efficient cooling, with PTC thermistor temperature control.
An optimised drum-to-sheave ratio keeps rope wear low. Return sheaves are wear-resistant and the drum grooves are finely machined to be kind to the rope.
The drum is easy to reach for rope changes, and the bottom hook block keeps headroom low despite a generously sized hook.
A: Use the enquiry button with your load, lift height, power supply and, if the hoist travels, your beam or crane details. We will come back to you with a quote and an estimated lead time.
A: The SH covers up to 32,000 kg. The AS 7 range starts with the ASR 7 at 20,000 kg and goes to 125,000 kg, and its single-axis layout suits narrow installations.
A: The AS 7 ZW winds two ropes in opposite directions, so the hook rises and lowers with no sideways movement and loads can be positioned exactly. It also increases capacity, speed and lift height.
A: Yes, the AS 7 Ex.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
STAHL CraneSystems makes wire rope hoists, chain hoists, winches and crane components in Künzelsau, Germany. The business traces back to a workshop founded in Stuttgart in 1876 and is known for explosion-protected lifting equipment. It has been part of Columbus McKinnon (CMCO) since 2017.
See all STAHL products →