The STAHL CraneSystems SH is one of the best-known electric wire rope hoists in the world, used by end users, crane builders and system manufacturers.
It covers 500 kg to 32,000 kg in five frame sizes with 27 load capacity variants, with the SH 6080 extending the range to 32,000 kg.
Its modular design lets standard and custom-made components be combined into almost any solution, from a stationary hoist or towing unit to a monorail hoist or a double girder crane crab.
It is compact thanks to its U-shape, largely maintenance-free, and built for a long service life to FEM/ISO standards. This is an enquiry-only product: send us your details and we will quote.
Capacity 500 kg to 32,000 kg. Supply 380 to 415 V 50 Hz or 440 to 480 V 60 Hz as standard, all voltages optional. Hoist motor IP55 (IP66 optional), thermal class F, PTC thermistor control. Brake IP65 (IP66 optional). Standard paint RAL 6018 yellow-green and RAL 7021 black-grey. Made by STAHL CraneSystems GmbH, Künzelsau, Germany (Columbus McKinnon group). Full selection data in the SH brochure and fast delivery flyer (Datasheets).
STAHL offers these SH models on quick delivery as a stationary hoist, on a KE low headroom monorail trolley, or on an OE crab:
| Model | Capacity | Duty (ISO) | Hoisting speed | Lift heights |
|---|---|---|---|---|
| SH 3005-25 4/1 | 2,000 kg | M6 | 1 / 6.3 m/min | 6 m or 10 m |
| SH 3006-25 4/1 | 2,500 kg | M5 | 1 / 6.3 m/min | 6 m or 10 m |
| SH 3008-20 4/1 | 3,200 kg | M5 | 0.8 / 5 m/min | 6 m or 10 m |
| SH 4012-20 4/1 | 5,000 kg | M5 | 0.8 / 5 m/min | 6 m or 10 m |
| SH 4016-16 4/1 | 6,300 kg | M4 | 0.6 / 4 m/min | 6 m or 10 m |
| SH 5020-25 4/1 | 8,000 kg | M5 | 1 / 6.3 m/min | 6 m, 10 m or 20 m |
| SH 5025-20 4/1 | 10,000 kg | M5 | 0.8 / 5 m/min | 6 m, 10 m or 20 m |
| SH 5032-25 4/1 | 12,500 kg | M4 | 1 / 6.3 m/min | 6 m, 10 m or 20 m |
Buy online: the eight fast delivery models are available to order now on the STAHL SH Wire Rope Hoist – Fast Delivery page, with an estimated lead time of 5 days.
Fast delivery hoists include a gear type limit switch with four switch elements (slow down, working and ultimate limits at top, ultimate limit at bottom), SLE condition monitoring with motor management and hours counter, PTC thermistor monitoring of hoist and travel motors, electronic overload protection, dual-speed hoisting, dual-speed 20/5 m/min travel (KE and OE), 400 V 3-phase 50 Hz supply, 48 V AC control voltage, rope safety factor 5.0 (below 5.0 for the SH 4016), IP55 protection, -20 to +40 °C ambient range, and a full-circumference heavy duty cast iron rope guide with tension spring. They are supplied with crane manufacturer's control, without pendant, transformer or main contactor.
Options include a cross travel limit switch (KE and OE) and monorail hoist control (KE).
Magnetek IMPULSE VG+ hoist drive functions include encoder feedback, slack rope detection, brake check at stop, torque proving at start, dynamic braking, hook height measurement, phase loss detection, slip compensation, short-circuit protection, safe torque off and Micro-Speed. The IMPULSE G+ Mini travel drive adds Safe Operating Windows, Quick Stop, motor thermal overload protection, auto tuning and sway control, and is rated to EN 61800-5-2, EN 61508 and SIL2.
| Item | Standard | Optional |
|---|---|---|
| Ambient temperature | -20 °C to +40 °C | -40 °C to +80 °C |
| Protection (IEC/EN 60529) | IP55 | IP66 |
| Paint | Black-grey/yellow-green RAL 7021/6018, 60 to 80 µm | Any RAL colour, 120 to 320 µm, epoxy-resin base |
| Hoist motor control | Pole-changing or frequency controlled (2 to 100 %) | Frequency controlled (1 to 100 %) |
| Travel speed (50 Hz) | 5/20 m/min | 2.5/10 or 8/32 m/min; 2.5 to 25 or 4 to 40 m/min frequency controlled |
| Supply voltage | 380 to 415 V 50 Hz; 440 to 480 V 60 Hz | All voltages possible |
| Control | Crane manufacturer's control (no transformer or crane switch contactor) | Complete control with transformer and crane switch contactor |
| Control units | Not included | Control pendant or Magnetek radio remote control |
| Limit switches | Gear limit switch for top and bottom hook position plus operational top limit | Extra switching elements; travel limit switch |
| Overload cut-off | SLE | SMC Multicontroller |
| Hoist brake | Electromagnetic disc brake, asbestos-free linings | Manual brake release, rope drum brake, Twin Drive Concept redundancy, wear monitoring |
| Rope | Bright or galvanised to DIN EN 12385, safety factor usually 4.0 or more | Off-standard ropes, higher safety factor |
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
| Frame | Safe working load up to |
|---|---|
| SH 3 | 3,200 kg |
| SH 4 | 6,300 kg |
| SH 5 | 10,000 kg (12,500 kg) |
| SHR 6 | 16,000 kg |
| SH 6 | 25,000 kg (32,000 kg, SH 6080) |
| Version | Use |
|---|---|
| Stationary | Hoisting or towing in systems building; rope lead-off angle, mounting and motor position can be varied |
| KE monorail trolley | Monorails and single girder cranes; extremely low headroom for long hook paths. Standard up to 16,000 kg |
| UE monorail trolley | Minimal overall width for narrow clearances on monorails and single girder cranes |
| DKE articulated trolley | Frequent travel round bends and narrow radii, one or two travel motors; up to 10,000 kg |
| OE double rail trolley | Double girder cranes; various track gauges for the full capacity range, compensates for uneven runways |
A single-grooved drum (reeving 1/1, 2/1, 4/1) suits stationary hoists and trolleys. Where true vertical lift is needed, a double-grooved drum with right and left-hand threads gives 2/2, 4/2 and 8/2 reeving.
Reevings 2/2-2 and 4/2-2 handle loads with two pick-up points.
Highly flexible special rope with a long service life, running in an enclosed rope guide of spheroidal graphite cast iron (GJS, previously GGG 40) that works at the highest and lowest temperatures. A 360° rope tensioner stops slack rope forming.
Suspended loads are monitored electronically all the time and the maximum load is limited by measuring at the rope anchorage, which works with multiple reeving too. SLE control and motor management gives condition monitoring as standard, suppresses inching to reduce stress, uses oversized contactors and monitors hoist and travel motor temperatures.
All gear stages are lubricated for life in an oil bath and run quietly. The asbestos-free brake needs no adjustment, is oversized for long life and can be inspected from outside (IP65, IP66 optional).
The hoisting motor is a special-purpose FEM/ISO classified motor rated for high duty cycles and switching frequency, IP55 (IP66 optional), thermal class F, mounted outside the rope drum for efficient cooling, with PTC thermistor temperature control.
An optimised drum-to-sheave ratio keeps rope wear low. Return sheaves are wear-resistant and the drum grooves are finely machined to be kind to the rope.
The drum is easy to reach for rope changes, and the bottom hook block keeps headroom low despite a generously sized hook.
A: Use the enquiry button with your load, lift height, power supply and, if the hoist travels, your beam or crane details. We will come back to you with a quote and an estimated lead time.
A: Standard SH hoists come with crane manufacturer's control and no pendant. A control pendant or Magnetek radio control can be added.
A: With a double-grooved drum the rope winds from both ends, so the hook rises straight up without moving sideways. It matters for precise placing and for tall lifts.
A: Yes. Every SH can be equipped with Magnetek inverters for stepless hoisting and travel.
A: Yes, the SH Ex, for Zone 1, Zone 2, Zone 21 and Zone 22.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
STAHL CraneSystems makes wire rope hoists, chain hoists, winches and crane components in Künzelsau, Germany. The business traces back to a workshop founded in Stuttgart in 1876 and is known for explosion-protected lifting equipment. It has been part of Columbus McKinnon (CMCO) since 2017.
See all STAHL products →