Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
STAHL CraneSystems SXD / SXF Wire Rope Hoist
1 / 6

STAHL CraneSystems SXD / SXF Wire Rope Hoist

Part no. STAHL-SXD-SXF-WIRE-ROPE-HOIST
Price
Price on application
Tell us what you need and we will come back with a quote the same working day.

About this item

  • 2,000 kg to 10,000 kg, lift heights of 7.5 m or 12 m
  • SXD two-speed or SXF frequency controlled with Dynamic Lift
  • Compact, lightweight: a 10 t trolley from just 595 kg

Product description

The STAHL CraneSystems SXD and SXF are STAHL's newest electric wire rope hoists, designed for loads from 2,000 kg to 10,000 kg.

They combine proven STAHL quality with a slimmer, lighter frame that makes installation, commissioning and maintenance much easier, and cuts operating costs.

The SXD (dual speed) uses pole-changing motors for two speeds, main and fine lifting, for reliable operation in standard applications.

The SXF (frequency controlled) adds an integrated Magnetek frequency converter for infinitely variable speed, smooth starting and precise positioning, plus the Dynamic Lift System and SMC 4 Multicontroller. Both are available as individual hoists or as STAHL CraneKits for overhead and bridge cranes.

This is an enquiry-only product.

Key Features
  • Eight capacities from 2,000 kg to 10,000 kg, all 4/1 reeving
  • Lift heights of up to 7.5 m or 12 m depending on model
  • Low tare weight: a 10,000 kg trolley weighs from 595 kg
  • One drive shaft length covers flange widths of 90 to 500 mm, adjustable on site without special tools or extra parts
  • Plastic rope guide with tension spring, 360° closed guide ring and finger protection system
  • Integrated overload protection measured at the rope anchorage, factory set to the hoist's capacity
  • Lifetime-lubricated gearbox with gear vent; brake motor outside the drum for cooling
  • Designed to ASME, FEM and DIN ISO standards

Specifications

SXD 4 SXF 4 SXD 5 SXF 5
Motor output 4.8 | 5.8 kW 2.6 kW 8.7 | 10.4 kW 4.5 kW
Motor type / poles 8/2HM5-MG, 2-pole 4HM3-MG, 4-pole 8/2HM6-MG, 2-pole 4HM5-MG, 4-pole
Supply 380 to 415 V 50 Hz; 440 to 480 V 60 Hz 380 to 415 V 50 Hz 380 to 415 V 50 Hz; 440 to 480 V 60 Hz 380 to 415 V 50 Hz
Control voltage 48 / 230 V AC (50 Hz) 48 / 230 V AC 48 / 230 V AC (50 Hz) 48 / 230 V AC
Duty cycle 40 % 40 % 40 % 40 %
Bottom hook H164-4 H164-4 H229-4 H229-4
Travel speed (50 Hz) 4 / 16 m/min 2.5 to 25 m/min 4 / 16 m/min 2.5 to 25 m/min
Weight, drum L2H 340 kg 310 kg 595 kg 556 kg
Weight, drum L3H 370 kg 340 kg 665 kg 626 kg

The SXD uses a counterweight instead of wear-prone counter-pressure rollers. The SXF's lighter gearbox housing needs no counterweight, so its control cabinet sits inside the trolley frame. Dimension drawings are in the SXD / SXF brochure (Datasheets).

The Dynamic Lift System (SXF)

The DLS measures the actual load and adjusts the lifting speed continuously along a curve. At part load, Advanced Ultra-Lift raises speed to as much as 300 % of nominal (up to 150 Hz), so light lifts are done quickly while heavy lifts stay slow and controlled.

The Magnetek drive gives shock-free starts and stops, saving energy and reducing wear.

Options
  • KE-X monorail trolley with very low travel mechanism height for large hook paths
  • Travel limit switch with advance and end switches in both directions
  • Towing arm, left or right hand
  • STH cable-connected control or Magnetek radio controls (push-button or master switch)
  • Supplied as a STAHL CraneKit for single girder overhead and suspension cranes

Documents (1)

View on this page or download.

PDFSTAHL SXD / SXF Wire Rope Hoist Brochure
PDF document

Using and looking after it

Always read the manufacturer’s instructions before use. See the documents

Typical Applications
  • Single girder overhead and suspension cranes
  • Moving parts and components between warehouse and production
  • Monorail systems on the KE-X trolley
  • General manufacturing where a compact, cost-effective hoist is needed

Buying guide

Choosing the Right Model
Type Capacity ISO rope drive SXD hoisting speed SXF speed with DLS
SXD / SXF 4005 2,000 kg M6 1.2 / 5 m/min 0.5 to 4.5 ... 9 m/min
SXD / SXF 4006 2,500 kg M5 1.2 / 5 m/min 0.5 to 4.2 ... 9 m/min
SXD / SXF 4008 3,200 kg M5 1.2 / 5 m/min 0.5 to 3.9 ... 9 m/min
SXD / SXF 4010 4,000 kg M5 1.2 / 5 m/min 0.5 to 3.5 ... 9 m/min
SXD / SXF 4012 5,000 kg M5 1.2 / 5 m/min 0.5 to 3.0 ... 9 m/min
SXD / SXF 5016 6,300 kg M6 1.2 / 5 m/min 0.45 to 3.5 ... 8.1 m/min
SXD / SXF 5020 8,000 kg M5 1.2 / 5 m/min 0.45 to 3.2 ... 8.1 m/min
SXD / SXF 5025 10,000 kg M5 1.2 / 5 m/min 0.45 to 3.0 ... 8.1 m/min

Speeds at 50 Hz (SXD 1.5/6 m/min at 60 Hz). SXF figures are minimum, rated-load and maximum part-load speeds with Advanced Ultra-Lift. Mechanism classification M4/5 (SXD) and M5 (SXF).

Choose the SXD for dependable two-speed lifting at a lower price. Choose the SXF for precise, smooth positioning and much faster handling of part loads: STAHL quotes average lifting speeds of 6.5 to 6.6 m/min across light and medium load spectrums, against a typical 4 to 5 m/min for pole-changing hoists, and productivity gains of up to 65 %.

Questions and answers

Q: How do I get a price?

A: Use the enquiry button with your load, lift height, power supply and, if the hoist travels, your beam or crane details. We will come back to you with a quote and an estimated lead time.

Q: SXD or SXF: which do I need?

A: The SXD suits most standard applications with two fixed speeds. The SXF adds stepless control, faster part-load lifting and extra safety monitoring, which suits precise or high-throughput work.

Q: What beam flange widths does it fit?

A: The standard drive shaft covers 90 to 500 mm and can be readjusted on site without replacing parts.

Have a question about this product?Ask a question

More in Electric Wire Rope Hoists

View all →