The STAHL CraneSystems SH Ex is the explosion-protected version of the SH electric wire rope hoist, built on the same modular technology.
STAHL describes its SH Ex programme as the world's first complete wire rope hoist portfolio for Zone 1, Zone 2, Zone 21 and Zone 22, Class I Division 1 and Class I Division 2.
All components come from STAHL's own production, from motor to controls, and design and manufacturing are certified to ATEX and IECEx, with NEC and CEC certification for export markets and INMETRO and TC RU versions available.
This is an enquiry-only product: tell us the zone and application and we will quote.
Based on the SH programme, 500 kg to 32,000 kg, subject to the explosion protection required. Configuration, trolley and controls are matched to your zone and application. See the STAHL SH brochure and Expertise in Explosion Protection brochure (Datasheets).
| Use | Category | Protects against | Explosion protection class |
|---|---|---|---|
| Zone 1 | Ex II 2 G | Gas | Ex db eb IIB T4 Gb or Ex db eb IIC T4 Gb |
| Zone 2 | Ex II 3 G | Gas | Ex db eb ec IIB T3 (T4) Gc or Ex db eb ec IIC T3 (T4) Gc |
| Zone 21 | Ex II 2 D | Dust | Ex tb IIIC T120 °C Db |
| Zone 22 | Ex II 3 D | Dust | Ex tc IIIC T120 °C Dc |
| Class I, Div 1 (SH) | - | Gas | Class I, Zone 1, IIB T4; Class I, Division 1, Groups C, D, T4 |
| Class I, Div 2 | - | Gas | Class I, Zone 1, AEx db eb IIC T4 Gb; Class I, Division 2, Groups A, B, C, D, T4 |
For Zone 1 and Zone 21, motors are grey cast iron and combine flameproof enclosure (db), increased safety (eb) and protection by enclosure (tb). Zone 2 motors are aluminium with increased safety (ec), and Zone 22 motors are IP66 with protection by enclosure (tc).
Panel boxes combine db, eb and tb protection, cable entry is indirect via post-type bushings from an Ex e connection box, and SWH ex control pendants are designed specifically for hazardous areas. Brass wheels are used for higher travel speeds.
STAHL has engineered Zone 1 SH Ex hoists and crane components for temperatures down to -50 °C, with thermally insulated housings for the hoist gear and controls, Ex space heaters in every motor, automatic switching from radio to manual below -20 °C and automatic cut-off at -40 °C. All parts were taken from the standard SH portfolio.
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
Highly flexible special rope with a long service life, running in an enclosed rope guide of spheroidal graphite cast iron (GJS, previously GGG 40) that works at the highest and lowest temperatures. A 360° rope tensioner stops slack rope forming.
Suspended loads are monitored electronically all the time and the maximum load is limited by measuring at the rope anchorage, which works with multiple reeving too. SLE control and motor management gives condition monitoring as standard, suppresses inching to reduce stress, uses oversized contactors and monitors hoist and travel motor temperatures.
All gear stages are lubricated for life in an oil bath and run quietly. The asbestos-free brake needs no adjustment, is oversized for long life and can be inspected from outside (IP65, IP66 optional).
The hoisting motor is a special-purpose FEM/ISO classified motor rated for high duty cycles and switching frequency, IP55 (IP66 optional), thermal class F, mounted outside the rope drum for efficient cooling, with PTC thermistor temperature control.
An optimised drum-to-sheave ratio keeps rope wear low. Return sheaves are wear-resistant and the drum grooves are finely machined to be kind to the rope.
The drum is easy to reach for rope changes, and the bottom hook block keeps headroom low despite a generously sized hook.
A: Use the enquiry button with your load, lift height, power supply and, if the hoist travels, your beam or crane details. We will come back to you with a quote and an estimated lead time.
A: The zone, gas or dust group and temperature class from your hazardous area classification, plus the load, lift height and crane type.
A: Yes. STAHL supplies explosion-protected end carriages, travel drives, controls and signal devices to go with the hoist.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
STAHL CraneSystems makes wire rope hoists, chain hoists, winches and crane components in Künzelsau, Germany. The business traces back to a workshop founded in Stuttgart in 1876 and is known for explosion-protected lifting equipment. It has been part of Columbus McKinnon (CMCO) since 2017.
See all STAHL products →