Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
STAHL CraneSystems TDC Twin Drive Concept Wire Rope Hoist
1 / 5

STAHL CraneSystems TDC Twin Drive Concept Wire Rope Hoist

Part no. STAHL-TDC-TWIN-DRIVE-HOIST
Price
Price on application
Tell us what you need and we will come back with a quote the same working day.

About this item

  • Two redundant motor-gear units: the load is held even if a gear breaks
  • Meets DIN EN 14492-2, Annex B for molten metal
  • SH TDC up to 16 t; also available on the AS 7

Product description

The STAHL CraneSystems TDC Twin Drive Concept is the uncompromising solution for hoists that must comply with DIN EN 14492-2, Annex B.

TDC electric wire rope hoists are intended for transporting molten metal and for other high-risk applications where acids, alkalis or gases are present, or where loads pass over gas and acid pipelines.

Every TDC hoist has two motor-gear units as standard.

Both motors are always controlled in sync, and the brake on each motor is designed so that, in an emergency, either one can brake or hold the load on its own. The load cannot drop even if a gearbox breaks.

This is an enquiry-only product: tell us the application and we will specify and quote.

Key Features
  • Prevents the load from dropping even if the gear breaks
  • Two synchronously controlled hoist motors and brakes
  • Both brakes act together as operating and holding brakes; operating and safety brakes are the same construction
  • Continuous monitoring of brakes, drives and load by STAHL condition monitoring
  • Two brakes with manual release for emergency lowering
  • Robust, fully enclosed system built from standard components
  • Up to 60 % higher load capacity when not transporting molten metal

Specifications

SH TDC up to 16 t (see table); AS 7 TDC on request. Standard supply 380 to 415 V 50 Hz. Complies with DIN EN 14492-2, Annex B. Details are in the STAHL SH and AS 7 brochures (Datasheets).

Options
  • Control pendant with EMERGENCY STOP, 2-step switching for hoist, cross and long travel, IP65
  • Gear limit switch with up to eight switching elements for extra stopping positions and bottom hook limiting
  • SMC Multicontroller: load monitoring even when idle, ALC automatic load control, load spectrum memory, operating data logging and PC data exchange
  • Travel limit switch on the crab with fast/slow pre-limiting in both directions, IP66
  • SLD large-format load display, four or six digits, 100 or 150 mm high, with CAN and other interfaces
  • Horn and flashing light on the trolley, triggered from the pendant
  • Manual brake release for lowering the load during a power cut
  • Rope drum brake: a redundant intercept and holding brake that stops the load falling even if the gear breaks
  • Magnetek IMPULSE VG+ (hoist) and IMPULSE G+ Mini (travel) inverters, and Magnetek radio controls to EN ISO 13849-1 PL d

Documents (2)

View on this page or download.

PDFSTAHL SH Wire Rope Hoist Brochure
PDF document
PDFSTAHL AS 7 Wire Rope Hoist Brochure
PDF document

Using and looking after it

Always read the manufacturer’s instructions before use. See the documents

Typical Applications
  • Foundries and steelworks transporting molten metal
  • Chemical plants where acids, alkalis or gases are present
  • Lifts over gas and acid pipelines
  • Test facilities and high-value lifts: STAHL cites a portal crane with two SH 6 TDC hoists, classified ISO M6, in a wave test facility

Buying guide

Choosing the Right Model
Frame size Reeving Safe working load up to
SH 50 TDC 4/1 8 t
SH 60 TDC 2/1; 4/2-1 8 t
SH 60 TDC 4/1; 8/2-1 16 t

Available stationary or with a trolley; other variations on request. The Twin Drive Concept is also offered as drive redundancy on the AS 7 wire rope hoist for heavier loads, and an SH hoist can be added as an auxiliary hoist.

How It Works

The two motor-gear units drive the rope drum together. If one drive train fails, the other keeps control of the load, and each brake is sized to hold the full load alone.

Condition monitoring checks brakes, drives and load continuously, and the brakes can be released by hand to lower the load safely in an emergency.

Design & Construction

TDC hoists are based on the SH and AS 7 programmes, so they share the enclosed spheroidal graphite cast iron rope guide with 360° rope tensioner, lifetime-lubricated gearing, electronic overload cut-off at the rope anchorage, SLE/SMC control and motor management, IP55 motors (IP66 optional) with PTC thermistor control, and FEM/ISO classification.

Questions and answers

Q: How do I get a price?

A: Use the enquiry button with your load, lift height, power supply and, if the hoist travels, your beam or crane details. We will come back to you with a quote and an estimated lead time.

Q: Is the TDC a separate hoist?

A: It is a drive arrangement built on STAHL SH and AS 7 wire rope hoists. We specify the base hoist with you when quoting.

Q: Why is the capacity higher when not handling molten metal?

A: Molten metal duty carries stricter requirements, so the same TDC hoist can be rated up to 60 % higher for other loads.

Have a question about this product?Ask a question

More in Electric Wire Rope Hoists

View all →