The STAHL CraneSystems SHW 8 winch is based on the SH wire rope hoist programme and designed for the high-load bracket.
The standard range reaches 160,000 kg, and up to 250,000 kg is available on request with 16/2-1 reeving. More STAHL hoists are in our electric wire rope hoist range.
Strong hoist motors and a robust, low-maintenance design make it ideal for tough daily use, from power station cranes to systems building. This is an enquiry-only product: send us your load, lift and crane details and we will quote.
Capacity up to 160,000 kg standard, 250,000 kg on request. Hoist motors up to 38 kW (two-speed, 1:6) or up to 200 kW (stepless). See the STAHL SHW 8 winch brochure (Datasheets).
| Item | Standard | Optional |
|---|---|---|
| Ambient temperature | -20 °C to +40 °C | -40 °C to +80 °C |
| Protection | IP55 | IP66 |
| Paint | Black grey RAL 7021, 60 to 80 µm | Any RAL colour, 120 to 320 µm |
| Hoist motor control | Pole-changing or frequency controlled (2 to 100 %) | Frequency controlled (1 to 100 %) |
| Travel speed (50 Hz) | 5/20 m/min | 2.5/10 or 8/32 m/min; 4 to 40 m/min frequency controlled |
| Supply | 380 to 415 V 50 Hz; 440 to 480 V 60 Hz | All voltages |
| Overload protection | SLE evaluation device | SMC Multicontroller |
| Hoist brake | Single-disc spring-loaded brake | Manual venting, second brake, Twin Drive Concept, wear monitoring |
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
| Safe working load up to | Reeving |
|---|---|
| 25,000 kg | 4/2-1 |
| 32,000 kg | 4/2-1 |
| 40,000 kg | 4/2-1 |
| 50,000 kg | 8/2-1 |
| 63,000 kg | 8/2-1, 12/2-1 |
| 80,000 kg | 8/2-1, 12/2-1 |
| 100,000 kg | 12/2-1 |
| 125,000 kg | 12/2-1 |
| 160,000 kg | 12/2-1 |
Up to 250,000 kg with 16/2-1 reeving on request. The standard double-grooved drum (right and left-hand thread) gives true vertical lift with no lateral hook movement (4/2-1, 8/2-1, 12/2-1).
Optional 2/2-2 and 4/2-2 reevings handle multipoint load attachment.
| Component | Detail |
|---|---|
| Hoist motor | Pole-changing or frequency-controlled three-phase motors, FEM/ISO classified for high duty cycle and switching rate, IP55, thermal class F, thermistor temperature control |
| Brake | Low-maintenance, asbestos-free double-shoe brake, no readjustment, oversized for long life, inspectable from outside, IP65 |
| Hoist gear | Versatile ratios for individual speeds, oil lubricated, hardened and ground gears |
| Control | Condition monitoring as standard, jog-mode suppression, all common control voltages, oversized contactors, hoist and travel motor temperature monitoring |
| Overload cut-off | Permanent electronic load monitoring at the rope anchorage or the rotatably mounted gearbox, pre-set at the factory |
| Limit switch | Gear-type emergency limit switch at highest and lowest hook position, up to eight switching elements optional |
| Rope drive | Two flexible galvanised special ropes, safety factor above 4, wear-resistant sheaves, finely machined drum grooves, low-headroom hook block |
A: Use the enquiry button with your load, lift height, power supply and, if the hoist travels, your beam or crane details. We will come back to you with a quote and an estimated lead time.
A: Yes. It can be used stationary for hoisting or towing, with variable rope lead-off angle, hoist attachment and motor position.
A: Yes. The SHW 8 Ex is based on the SH programme and certified to ATEX and IECEx for Zone 1, Zone 2, Zone 21 and Zone 22.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
STAHL CraneSystems makes wire rope hoists, chain hoists, winches and crane components in Künzelsau, Germany. The business traces back to a workshop founded in Stuttgart in 1876 and is known for explosion-protected lifting equipment. It has been part of Columbus McKinnon (CMCO) since 2017.
See all STAHL products →