These options upgrade our roll-forward forklift tipping skips, new or already in service.
Choose castor sets so the skip can be pushed around by hand, lifting lugs for crane handling, fork clamps, a drain tap and filter for wet waste, auto retention, or an auto release kit for tipping at height without leaving the cab.
Castors are 100 mm diameter, supplied as a set of four: two fixed at the front and two swivel at the rear, in nylon for general use or cast iron for heavy loads, with or without brakes on the swivels.
Dimensions are in mm and weights in kg. The datasheet can be downloaded from this page.
You may also need the forklift tipping skip - galvanised 3 mm or the forklift tipping skip - heavy duty 5 mm.
View on this page or download.
Always read the manufacturer’s instructions before use. See the documents
Our skips are pre-drilled, so castors bolt straight on. Other makes of skip may need the castor plates welding in place.
Castors let staff move a skip around the workplace without tying up the forklift, and braked swivels stop it rolling away on a slope.
Choose nylon castors for smooth floors and general waste, and cast iron for heavy loads or rough surfaces. Add brakes if the skip will stand on a slope or near a loading edge.
A: They bolt straight on to our skips, which are pre-drilled. Other makes may need the plates welding on.
A: Nylon rolls easily and quietly on smooth floors. Cast iron carries heavier loads and copes better with rough or hot surfaces such as foundry floors.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account