Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Multi-Sec MP-25 Multi-Point Lifting Beam Hire
1 / 6

Multi-Sec MP-13 Multi-Point Lifting Beam

Part no. MS-MP-13
Weekly hire
From £267.90/wkFrom £223.25/wkInc VATEx VAT
From £223.25/wk ex VATFrom £267.90/wk inc VAT ·

About this item

  • Reconfigurable multi-point lifting beam rated to 13 tonnes
  • Rigs as a centre point lift, spreader or semi-spreader beam
  • Standard forklift pockets and multiple drilled lifting positions

Product description

The Multi-Sec MP-13 is a modular lifting beam rated to 13 tonnes that can be rigged three ways: as a centre point lift, a spreader beam or a semi-spreader beam, with no change of equipment.

Choose a 3 m or 6 m beam, and bolt beams together for spans up to 12 m.

It is designed, made and tested in the UK, DNV Type Approved to DNV-ST-0378, and proof tested before despatch.

Key Features
  • 13 t WLL on a single 3 m or 6 m beam
  • Three rigging modes from one set of hardware
  • Bolt beams together for 9 m or 12 m spans
  • Drilled lifting positions along the full length
  • Forklift pockets on every beam for site handling

Specifications

Working load limit13 t (single beam)
Beam lengths3 m, 6 m
Combined spans9 m (13-7 t), 12 m (13-3 t)
Sling angle basis30° to vertical
ConfigurationsCentre point lift, spreader beam, semi-spreader beam
HandlingForklift pockets; multiple drilled lifting positions
ApprovalDNV Type Approved to DNV-ST-0378
StandardsBS EN 13155:2003+A2:2009, BS EN 1993-1-1:2005 (Eurocode 3), Machinery Directive 2006/42/EC
ManufactureUK, ISO 9001:2015, BS EN 1090-2 Execution Class 3
Testing100% proof tested before despatch

Ask us for the Multi-Sec Range Brochure 2026 and Assembly Quick Guide.

What's Included
  • 1 x Multi-Sec MP-13 beam in your chosen span, with full certification and traceability

You may also need: header slings, shackles and bottom rigging rated for the lift.

Using and looking after it

Always read the manufacturer’s instructions before use.

Typical Applications
  • Low-headroom lifts inside buildings and plant rooms
  • Machinery and plant installation
  • Fabricated steel assemblies and modular units
  • Long loads that need several support points

Buying guide

Design & Construction

Centre point lift: the beam hangs from one top point and works in bending, like a lifting beam. This keeps headroom to a minimum and supports a symmetrical load on several lower points.

Spreader beam: two angled top slings connect to top points that line up with the bottom points. Several spans are available from the same hardware for a standard two-point lift.

Semi-spreader beam: the top points are offset from the bottom points, giving a low-headroom lift for loads picked at the ends or at several points along the beam.

In spreader and semi-spreader modes the top (header) slings must not exceed 30° to vertical. Capacity depends on the top and bottom spans used.

Choosing the Right Size
Build Span Capacity
Single beam 3 m or 6 m 13 t
Two beams (3 m + 6 m) 9 m 13 t to 7 t
Three beams (3 m + 6 m + 3 m) 12 m 13 t to 3 t

Capacity in the longer builds varies with the top and bottom spans. Send us both and we will confirm the rated capacity for your lift.

For heavier loads, see the 25 t MP-25. Where lift points are needed in two directions, our lifting frames may suit better.

Questions and answers

Q: What capacity do I get at 9 m?

A: Between 13 t and 7 t, depending on the top and bottom spans. The configuration charts are in the range brochure, or send us your spans and we will confirm.

Q: Do I need different parts to change from spreader to centre point?

A: No. The same beam assembly rigs as a centre point lift, spreader beam or semi-spreader beam.

Q: Is it approved for offshore use?

A: Multi-Sec systems are DNV Type Approved to DNV-ST-0378, the standard for offshore and platform lifting appliances.

Have a question about this product?Ask a question

More in Spreader Beams

View all →