The Multi-Sec MP-25 is the heavier beam in the Multi-Sec multi-point range, rated to 25 tonnes on a single 3 m or 6 m beam. Bolted together, beams give 9 m and 12 m spans, still carrying 16 t and 10 t at the low end of their range.
One assembly rigs as a centre point lift, spreader beam or semi-spreader beam. It is UK made and proof tested before despatch; ask us to confirm approvals for your lift.
Ask us for the Multi-Sec Range Brochure 2026 and Assembly Quick Guide.
You may also need: Multi-Sec MP-13 Multi-Point Lifting Beam, plus header slings, shackles and bottom rigging rated for the lift.
Always read the manufacturer’s instructions before use.
Hung from a single centre point, the MP-25 acts as a lifting beam in bending, using the least headroom and spreading a symmetrical load across several bottom points.
As a spreader beam, angled top slings meet top points aligned with the bottom points, so one set of hardware gives several lifting spans for a two-point lift. As a semi-spreader, the top points are offset from the bottom points for low-headroom lifts picked at the ends or at multiple points along the beam.
Header slings in spreader and semi-spreader modes must stay within 30° of vertical. Rated capacity in each build depends on the top and bottom spans.
| Build | Span | Capacity |
|---|---|---|
| Single beam | 3 m or 6 m | 25 t |
| Two beams (3 m + 6 m) | 9 m | 25 t to 16 t |
| Three beams (3 m + 6 m + 3 m) | 12 m | 25 t to 10 t |
Send us the top and bottom spans for your lift and we will confirm the rated capacity. For loads up to 13 t, the lighter MP-13 does the same job. Loads needing lift points in two directions may suit our lifting frames.
A: Both rig the same three ways. The MP-25 carries 25 t on a single beam against 13 t, and holds far more capacity at 9 m and 12 m spans.
A: Use the configuration charts in the range brochure, or send us your top and bottom spans and we will confirm it.
A: Ratings are based on header slings at no more than 30° to vertical.
Loading your basket…
Delivery calculated at checkout.
CheckoutCard, Apple Pay, Pay by bank, proforma or 30-day account
Multi-Sec beams need a delivery quote before they can be ordered. Tell us where it's going and we'll come back with your quote the same working day.

Multisec is a UK engineering company that designs, manufactures and tests engineered lifting systems. It is best known for its modular spreader beams. Its equipment is used in offshore wind, marine, ports, infrastructure and heavy engineering.
See all Multi-Sec products →