Skip to content
WolffKran Group · Est. 1854Fast UK delivery & export optionsPrice match promiseCredit accounts for business01709 437141
Prices
Lifting Equipment

Spreader Beams

Spreader beams and modular beam systems for sharing a lift between two points and controlling how the load hangs. Choose complete modular spreader beams or build and extend with Multi-Sec components, almost all from Multi-Sec. For four-point lifts, see lifting frames. Spreader beams are also available to hire; see spreader beam hire.

Products
125
Brands
Modulift, Multi-Sec +3
Price from
£44
Certification
✓ UKCA & CE
Products 125
Brands Modulift, Multi-Sec +3
Price from £44
Certification ✓ UKCA & CE
110 productsClear all
Buying guide

Spreader Beams

Spreader beam or lifting beam

A spreader beam hangs from angled top slings and is loaded in compression. A lifting beam hangs from a single central top connection and is loaded in bending. Spreader beams suit wide loads and long spans. Lifting beams suit jobs with restricted headroom.

Most of this page is modular spreader beams from Modulift and Multi-Sec. For fixed lifting beams, Conquip makes a 5,000kg beam in 3m, 5m and 7m lengths, with several underside lifting points and a built-in stand that keeps the hooks clear when the beam is landed. The Conquip adjustable lifting beam is rated at 10,000kg and has sliding lifting points to balance loads with an off-centre centre of gravity. Multi-Sec MP-13 and MP-25 multi-point lifting beams are also listed.

How modular spreader beams work

Each modular beam is a pair of end units, a pair of drop links and a set of interchangeable struts bolted between the end units. Add or remove struts to change the span. The top slings connect to the end units and the load hangs from the drop links. Never hang a load from the strut sections.

You can buy a complete beam or build one from parts. The modular spreader beams range has complete Multi-Sec systems in set lifting-centre sizes. Multi-Sec components lists end units, drop links, struts and corner units by model, and the Modulift parts are listed the same way. Keep to one manufacturer and one model series. Parts are designed and load-rated as a set.

Choosing a model: capacity falls with span

The model number is the maximum working load limit (WLL). That maximum does not hold at every span, and the top sling angle changes it too. Multi-Sec rates its Multi-13 at 13t up to 5.75m span with 30° top slings, falling to 8t at its 7.75m maximum span. With 45° top slings the same beam is rated 4.5t at 7.75m. Check the load chart for your span and sling angle, and the minimum top sling length it gives, before you order.

Modulift's standard load charts are drawn at 30° sling to vertical. Maximum WLL and span for the Modulift models on this page:

Modulift model Max WLL (at span) Max span (at reduced WLL)
MOD 6 6t at 3.6m 4.5m
MOD 12 12t at 4.75m 6.5m
MOD 24 24t at 5m 8m
MOD 34 34t at 6m 10m
MOD 50 50t at 8m 13m
MOD 70 70t at 10.5m 14m
MOD 70H 100t at 8.5m 14m
MOD 110 110t at 14m 18m
MOD 110H 170t at 11.5m 18m
MOD 250/250 250t at 14m 21m
MOD 400/400 400t at 17m 24m
MOD 400/600 600t at 14m 24m

Multi-Sec's range runs from the Multi-13 (13t, spans to 7.75m) through the Multi-25, 50, 75, 110 and 170 to the Multi-250 (250t, spans to 22m). Modulift beams are made in Poole and Multi-Sec beams in Middlesbrough.

Hire, frames and certification

Modulift beams from MOD 6 to MOD 400/600 and the Multi-Sec Multi 13, 25 and 50 beams are available through lifting beam and frame hire. Hire suits one-off lifts. Buying suits regular work where you can reuse the struts across different spans.

Corner units turn spreader beam struts into a four-point frame. Modulift CMOD corner units and Multi-Sec corner units both take the same struts as the beams, so one set of struts can serve both jobs. Complete frames are under lifting frames.

  • Approvals: Modulift holds DNV type approval for its spreader beams from MOD 6 up and designs to BS EN 13155. The standard Multi-Sec Multi-13 to Multi-250 range is DNV type approved to DNV-ST-0378.
  • Thorough examination: LOLER treats equipment for attaching loads to a crane as an accessory for lifting. HSE sets a 6-month thorough examination interval for lifting accessories unless an examination scheme says otherwise.
  • Marking: Check the marked WLL on the certificate matches the span you have assembled.
Common questions
What is the difference between a spreader beam and a lifting beam?

A spreader beam hangs from angled top slings and is loaded in compression, so it suits wide loads and long spans. A lifting beam hangs from one central top connection and is loaded in bending, so it suits jobs with restricted headroom.

What size spreader beam do I need?

Start with the load weight and the distance between the load's lifting points, then check the manufacturer's load chart for that span and your top sling angle. Capacity falls as span increases, so a beam's headline tonnage only applies up to a certain span.

Can I hire a spreader beam?

Yes. Modulift modular spreader beams from MOD 6 to MOD 400/600 and Multi-Sec Multi 13, 25 and 50 beams are available to hire, as well as Multi-Sec MP-13 and MP-25 multi-point lifting beams.

Can I mix Modulift and Multi-Sec spreader beam parts?

No. Struts, end units and drop links are designed and load-rated as a set for each model series, and the load chart only covers that manufacturer's approved combinations.

How often does a spreader beam need a thorough examination?

A spreader beam is a lifting accessory under LOLER, so HSE sets a 6-month thorough examination interval unless a competent person's examination scheme specifies otherwise.

Can spreader beam struts be used to make a lifting frame?

Yes. Modulift CMOD corner units and Multi-Sec corner units take the same struts as the matching spreader beam, so you can build a four-point frame. Check the frame load chart for the length, width and sling angle you plan to use.

What types of Spreader Beams are available?
Which brands do you stock for Spreader Beams?

We supply Invicta, Conquip, Wolff Onsite, Modulift and Multi-Sec. Ranges vary, so check the brand page for the full listing.

What else is in Lifting Equipment?